Panasonic Lumix DMC-LS85 Operating Instructions Manual

Also see for Lumix DMC-LS85: Brochure & specs Operating instructions Instrucciones de funcionamiento Operating instructions Operating instructions

Contents

Others92 VQT1X23LCD monitorThe LCD monitor turns off although the camera is turned on.• When the camera is not operated for a while, [POWER SAVE] or [AUTO LCD OFF] isactivated for [ECONOMY]. (P20)• If the LCD monitor turns off when you press the shutter button halfway, the batteries mayrun out.The LCD monitor darkens during use.• This camera automatically charges for fl ash recording and may darken the LCD monitorfor effi cient charge. The monitor may darken in the following cases;– After fl ash recording– Just after turning the camera ON– Just after setting to Recording Mode– When adjusting the zoom or pointing the camera toward dark sideThe LCD monitor lights up again to return to recording-ready condition after charging for flash.The LCD monitor becomes darker or brighter for a moment.• This phenomenon appears when pressing the shutter button halfway to set the aperturevalue and does not affect the recorded pictures.• This phenomenon also appears when the brightness changes when the camera iszoomed or moved. This is because of operation of the automatic aperture of the camera,and it is not a malfunction.The LCD monitor flickers indoors.• The LCD monitor may flicker for a few seconds after turning the camera on indoorsunder fl uorescent light. This is not a malfunction.The LCD monitor is too bright or dark.• Is the [POWER LCD] or the [HIGH ANGLE] mode activated? (P20)Black, red, blue and green dots appear on the LCD monitor.• This is not a malfunction. These pixels do not affect the recorded pictures.Noise appears on the LCD monitor.• In dark places, noise may appear to maintain the brightness of the LCD monitor. Thisdoes not affect the pictures you are recording.Uneven colours come on the LCD monitor.• If you press the LCD monitor with excessive force, uneven colours may appear on it.FlashFlash is not activated.• Is the fl ash setting set to Forced OFF [o]? Change the fl ash setting. (P34)• Flash Mode is not available when [BURST] (P56) in [REC] menu has been set.• Flash is not available depending on Scene Mode. (P35)The fl ash is activated 2 times.• The fl ash is activated twice when Red-eye Reduction (P34) has been set.