38 VQT3H43 VQT3H43 39Deleting picturesPlayback Mode:Changing recording information displaySelect type of deletion• To use [Delete All]→ go to stepSelect the pictures to delete(Repeat)• To release→ Press[DISP.]againPicture selectedPictures will be deleted from the card if the card is inserted, or from the built-in memory ifthe card is not inserted. (Deleted pictures cannot be recovered.)Set toPress to delete the displayed pictureSelect [Yes]●Do not turn off the power during deletion.●Use a sufficiently charged battery or an AC adaptor (optional) and DC coupler (optional).●Pictures cannot be deleted in the following cases:• Protected pictures• Card switch is in “LOCK” position. • Pictures not of DCF standard (→37)DeleteSelect [Yes]• To cancel → press [MENU/SET].• May take time depending onnumber of pictures deleted.• You can select [All Delete Except] in [Delete All] if there arepictures that have been set as[Favorite].To delete multiple (up to 50) or all pictures(after step )[DISP.]Change between different LCD monitor displays, such as Histograms.■HistogramDisplays distribution of brightness in picture– e.g. if the graph peaks at the right, this means thereare several bright areas in the picture. (Guide) A peakin the center represents correct brightness (correctexposure). This can be used as a reference forexposure correction (→46), etc.• Histogram from time of recording is different toHistogram in playback and displayed in orange, when recording with flash or in darklocations. Also, Histogram may differ from Histograms made with image editingsoftware.• Not displayed during ([Intelligent Auto] Mode), [Photo Frame] or Playback Zoom.■Guide lines• Reference for composition (e.g. balance) when recording.• Only guide line pattern is displayed in [Intelligent Auto] Mode.• When is in use, recording information and Guide lines cannot be displayedsimultaneously.●For motion picture or Slide Show playback, the operational guidance information iseither displayed or not displayed on the LCD.(Example)OKDark← → BrightPress to change displayThe display changes every time the button ispressed.