Panasonic Lumix DMC-ZS9 Owner's Manual

Also see for Lumix DMC-TZ18: Owner's manual Basic operating instructions Basic operating instructions

112 VQT3H43 VQT3H43 113Meanings of and required responses to major messages displayed on LCD monitor.Message displays[This memory card cannot be used]●A MultiMediaCard was inserted.→ Not compatible with the camera. Use a compatible card.[Some pictures cannot be deleted] [This picture cannot be deleted]●Non-DCF pictures (→37) cannot be deleted.→ Save needed data on a computer or other device, and then use [Format] on the camera. (→23)[No additional selections can be made]●The number of pictures that can be deleted at once has exceeded.●More than 999 pictures have been set as favorites.●The number of pictures allowing [Title Edit], [Text Stamp] or [Resize] (multiple settings) at once hasexceeded.[Cannot be set on this picture]●[Print Set], [Title Edit], or [Text Stamp] cannot be made for non-DCF pictures (→37).[Please turn camera off and then on again] [System Error]●The lens is not working correctly.→ Turn on power again.(Consult the dealer or your nearest Service Center if display still remains)[Some pictures cannot be copied] [Copy could not be completed]●Pictures cannot be copied in following cases.→ Picture of same name already exists in built-in memory when copying from card.→ File is not of DCF standard. (→37)→ Picture taken or edited on a different device.[Not enough space on built-in memory] [Not enough memory on the card]●There is no space left on the built-in memory or the card. When you copy pictures from the built-inmemory to the card (batch copy), the pictures are copied until the capacity of the card becomes full.[Built-In Memory Error] [Format built-in memory?]●Displayed when formatting built-in memory via computer, etc.→ Reformat directly using camera. Data will be deleted.[Memory Card Error] [Format this card?]●The card format cannot be used with this camera.→ Save needed data on a computer or other device, and then use [Format] on the camera. (→23)[Insert SD card again] [Try another card]●Access to card has failed.→ Insert card again.●Try with a different card.[Memory card error. This card cannot be used in this camera. Format this card?]●Card is not of SD standard.●When cards in capacities of 4 GB or more are used, only SDHC or SDXC Memory Cards aresupported.[Read Error]/[Write Error] [Please check the card]●Data read has failed.→ Check whether card has been inserted correctly (→12).●Data write has failed.→ Turn off power and remove card, before re-inserting and turning on power again.●Card may possibly be damaged.●Try with a different card.[Motion recording was cancelled due to the limitation of the writing speed of the card]●If recording stops even when using a card of the recommended speed class (→14), the data writingspeed has dropped. If this happens, we recommend backing up the data on the memory card andformatting it (→23).●Motion picture recording may be automatically terminated with certain cards.[A folder cannot be created]●Folder numbers in use have reached 999.→ Save needed data on a computer or other device, and then use [Format] on the camera. (→23)Folder number is reset to 100 when performing [No.Reset] (→22).[Picture is displayed for 16:9 TV] [Picture is displayed for 4:3 TV]●AV cable (supplied) is connected to the camera.→ To remove message immediately → Press [MENU/SET].→ To change aspect ratio → Change [TV Aspect] (→23).●USB connection cable (supplied) is only connected to the camera.→ Message disappears when cable is also connected to another device.[This battery cannot be used]●Use a genuine Panasonic battery.●Battery cannot be recognized as terminal is dirty.→ Wipe any dirt away from the battery terminal.