16 VQT3H43 VQT3H43 17Setting the clock ( The clock is not set when thecamera is shipped.) Setting the menuSet REC/PLAY switch to before turning on the power.To change time settingSelect [Clock Set] from the[Setup] menu, perform and.• Clock settings will be saved forapprox. 3 months even afterbattery is removed, provideda fully-charged battery wasinstalled in the camera for 24hours beforehand.●Failure to set the date and time will cause the date/time to be improperly printed when printingpictures at a digital photo center or when using [Date Stamp] or [Text Stamp].●After the time has been set, the date can be printed correctly even if the date is not displayed on thecamera screen.[MENU/SET]REC/PLAYswitchTurn on the powerThe power is turned on.If the language select screen is not displayed,proceed to step .Press [MENU/SET] while themessage is displayedPress ▲▼ to select the language,and press [MENU/SET]The [Please set the clock] message appears.(This message does not appear in PlaybackMode.)Press [MENU/SET]Press ◄► to select the items(year, month, day, hour, minute,display order or time displayformat), and press ▲▼ to setSelect either [24hrs] or [AM/PM] for thetime display format.Select the display order for the day, month, andyear ([M/D/Y], [D/M/Y], or [Y/M/D]).• To cancel → Press [ / ].Press [MENU/SET]Confirm the setting and press[MENU/SET]Turn on the power again and check the timedisplay. (Time and date can be displayed bypressing [DISP.] several times.)Bring up the menuSelect the [Setup] menuSelect the itemPage(Zoom lever canbe used to switchto next screen.)ItemSelect the settingSelectedsettingSettingsPress [ / ] several timesRefer to the following procedures to operate the menus.(Example) While in [Program AE] Mode, change [LCD Mode] on the [Setup] menu.(REC/PLAY switch: set to ; mode dial: set to )ShutterbuttonREC/PLAYswitchCamera ON/OFF switchMode dial[MENU/SET](menu display/set)[ / ] (Delete/Return)button●The menu closes and the monitor returns to the previous screen.