Panasonic MultiCam PV-DV202-K Operating Instructions Manual

Contents

Panasonic MultiCam PV-DV202-K Operating Instructions Manual Manual pdf 50 page image

501 Repeat steps 1 and 2 on page 49.2 Set POWER to VCR.3 Press (PLAY) to start playback ofthe cassette tape. And then, press(PAUSE) to select an image.4 Press PHOTOSHOT to record thedesired image to the Memory Card.• When PHOTOSHOT is pressed inPLAY or SLOW mode, the screengoes to STOP mode.• To playback the images of theMemory Card, see page 51.• When Variable Speed Search isdone (p. 35), this feature cannot beused.5 Repeat steps 3~4 to record anotherimage to the Memory Card.You can record still images from acassette tape to a Memory Card.3PLAYBefore you begin• Connect the Palmcorder to a powersource. (pp. 14, 15)• Set POWER to OFF before inserting aMemory Card. (p. 13)Recording images From aTape3PAUSE• Memory Card will not work when DVInterface Cable (i.LINK) is connected.WarningCard FeaturesCautions for the Memory Card• While Memory Card data is being read, do not remove it, turn off the power, or subjectunit to vibrations and/or shocks.• Do not leave the Memory Card in a place with high temperature, a place exposed todirect sunlight, or a place where electromagnetic waves and static electricity can begenerated.• Electromagnetic waves, static electricity, malfunction of the Digital Video Palmcorder orof the Memory Card itself could erase the data recorded on it. To prevent the loss ofpicture data, we recommend that you make a backup copy on the computer.• Do not bend or drop the Memory Card as this could damage it or the capturedcontents.• Do not touch the connector on the rear edge of the Memory Card with your fingers andtake care that no dirt, dust or water enters it.• Do not affix other labels to the Memory Card face or back as Card insertion/removalmay become impossible.2POWER4PHOTOSHOTDV202_402-K.p 49-52.p65 2003/06/12, 10:1550