Panasonic MultiCam PV-DV202-K Operating Instructions Manual

Contents

Panasonic MultiCam PV-DV202-K Operating Instructions Manual Manual pdf 75 page image

75PC ConnectionUsing Tape Image Data Before you begin• Insert a recorded Tape. (p. 11)• Make Palmcorder-PC connections.(p. 74)• Turn your PC on.• Set Palmcorder POWER to VCR.• Run the Software after the DVInterface Cable (i.LINK) has beenconnected to the Palmcorder.1 Repeat steps 1~4 on page 62 torun the PHOTOVU/MPEG4 MovieMessenger System.• When the DV Interface Cable (i.LINK)is connected, the input display willautomatically become DV. If it is notDV, please confirm the connection.Then, close and restart the software.• When using Windows XP, “WindowsMovie Maker” may openautomatically. If so, close “WindowsMovie Maker“ and “MovieMessenger”, and open “MovieMessenger” again.2 Click (PLAY) button on PC screento playback the DV tape.• Please use the LCD monitor on thePalmcorder or PC screen forconfirmation.By connecting the Palmcorder and PC withthe DV Interface Cable (i.LINK), you cantransfer Motion images and Still imagessaved on the DV Tape directly to your PC.To capture Motion images3 Click on [Normal] .4 Click on [Movie Capture] at thepoint you wish to capture a Motionimage. Click on [STOP] to end capture.• The image is transferred to the PC inreal time.• The maximum capture time is approx.3 minutes.• When capturing data containingchanges between 12 bit and 16 bitand/or between SP and LP mode, aseparate file will be made for eachmode.• Please refer to pages 64~73 for otherfunctions.• If PHOTOVU/MPEG4 Movie MessengerSystem does not work, please refer tonote on page 74.• Deactivate your PC ScreenSaver orthis application may shutdown duringimage capture.NoteNote2PLAY4MovieCapturePHOTOVU/MPEG4 Movie Messenger System (i.LINK)DV3Normal[When selecting Normal](Continued on next page.)STOPA Set Palmcorder POWER to VCR.B Connect the Palmcorder to your PCusing the DV Interface Cable(i.LINK).C Start up the PHOTOVU/MPEG4Movie Messenger System.How to insert the DV InterfaceCable (i.LINK)A Close the PHOTOVU/MPEG4 MovieMessenger System.B Remove the DV Interface Cable(i.LINK) from the Palmcorder.C Set Palmcorder POWER to OFF.How to remove the USB Cableor DV Interface Cable (i.LINK)DV202_402-K.p 74-76.p65 2003/06/12, 10:1575