Basic Operations3938TitleProcedureRemarks, etc.PUSHPlaying Back on a TVBy connecting the Movie Camera to a TV, you canwatch playback of the recorded scenes on the TVscreen.After UseFor models NV-DS15, NV-DS150 and NV-DS25, firstclose the LCD Monitor.1Connect the [AV OUT] Socket on the MovieCamera with the Video and Audio Input Sockets onthe TV.Use the AV Cable and to connect to the TV.If your TV is equipped with an S-Video Socket, alsoconnect the S-Video Cable.1Take out the cassette.(p. 12)2Set the [OFF/ON] Switchto [OFF].3Remove the Battery (p. 11) and retract theViewfinder.Making the Indications Appear on the TVScreenPress the [OSD] Button 1 on the RemoteController.The On-Screen Indications also appear on the TVscreen.³Before connecting, turn off both the Movie Cameraand the TV.³If a cassette recorded with copyright protection signalis played back, the screen becomes black. However,scenes recorded with this Movie Camera do notcontain a copyright protection signal.³If your TV is not equipped with AV Input Sockets, the21pin Adaptor (purchase separately) is necessary.Consult your dealer.Attaching the Lens CapAfter use, attach the supplied Lens Cap to the Lens toprotect it.OPEN /EJECTZOOMINDEX INDEXSELECTSTORESTOP: 9∫OSDDISPLAYV/REWSTILL ADVOFF/ONP.B.DIGITALDATE/TIMERESETTWsVOLrPHOTOSHOTSTART/STOPVIDEO CAMERAA.DUBPLAYPAUSEFF/WSTILL ADVMENUITEMSET6 1 5;E DVAR.SEARCH P.B.ZOOM1S-VIDEO OUT21 pin Adaptor[VIDEO IN]AV CableS-Video Cable[AV OUT][S-VIDEO OUT][AUDIO IN][S-VIDEO IN]AV OUT/PHONESS-VIDEO OUTAV OUT/PHONESListening to the Playback Sound viaHeadphonesIf you want to use headphones to listen to theplayback sound, connect them to the [PHONES]Socket on the Movie Camera. In this case, no sound(including beep and shutter click sounds) isreproduced from the Movie Camera’s built-inspeaker¡.¡built-in speaker: NV-DS15, NV-DS150, NV-DS25onlyAV OUT/PHONESONOFF