Panasonic NV-DS12B Operating Instructions Manual

Also see for NV-DS12B: Service manual

Contents

Editing8786[S-VIDEO OUT][AV OUT][S-VIDEO IN][AUDIO IN][EDITE]Editing Controller(VW-EC500E)Editing Controller(VW-EC1E)To Edit Socket[DC IN][VIDEO IN]21 pinAdaptorS-VIDEO OUTEDITAV OUT/PHONESD.STILLPICTUREECopying with the Help of an Editing ControllerIf you connect the Movie Camera to an Editing Controller equipped with 5-pin Edit Socket, this Movie Camera’splayback functions can be controlled from the Editing Controller.When Connecting the Editing Controller VW-EC500E (optional)³When you perform editing with the NV-HS1000VCR (optional) connected to this Movie Camera,first activate the Still Playback Mode on theMovie Camera and then start the actual editingoperation.³A VCR equipped with 5-pin Edit Socket isnecessary.³When you connect the VW-EC500E to the MovieCamera, an adjustment on the VW-EC500E isnecessary. For the operation of the EditingController, refer to its operating instructions.When Connecting the Editing Controller VW-EC1E (optional)³When you perform editing with the NV-HS1000VCR (optional) connected to this Movie Camera,first activate the Still Playback Mode on theMovie Camera and then start the actual editingoperation.³When you use the Editing Controller VW-EC1E,it is not necessary to connect it to the Edit Socketon the VCR, as the VCR’s operation is performedvia infrared remote control. Therefore, editing isalso possible onto VCRs not equipped with anEdit Socket.³For the operation of the Editing Controller, referto its operating instructions.When Editing with Time CodeSet [C.DISPLAY] on the [DISPLAY SETUP] Sub-Menu of the [VCR FUNCTIONS] Main-Menu to[TIMECODE] to make the Time Code appear.³When the Time Code is displayed, the TimeCode Signal is output from the Edit Socket.³When the Counter Indication is displayed, theLinear Tape Counter Signal is output.³If your VCR is not equipped with AV InputSockets, the 21pin Adaptor (purchaseseparately) is necessary. Consult your dealer.Using the Movie Camera with a ComputerThe Personal Computer Connection Kit VW-DTA9E (optional), or VW-DTA10B (optional)makes it possible to connect the Movie Camera toa computer and transmit still video images to it.The above illustration shows the connectionsin case of using the VW-DTA10B. For the VW-DTA9E, refer to its operating instructions.Computer System Requirements (VW-DTA10B)DV STUDIO2 can be installed in a PC/ATcompatible personal computer which can runMicrosoft® Windows® 95/98.Compatible machines:Personal computer with 80486DX4 or higher CPU(PentiumTM or higher recommended)Graphic card:True Color (approx. 16.7 million colours)recommended (operation also possible even with256 colours)Installed memory:16 MB or more (32 MB or more recommended)Free hard disk space: At least 16 MBDisk drive: CD-ROM drivePorts: RS-232C (D-sub 9 pin)/or USBOther requirements: MouseTo connect the Movie Camera to the computer,use the special Interface Box 1 contained in thePersonal Computer Connection Kit.³If your VCR is not equipped with AV InputSockets, the 21pin Adaptor (purchaseseparately) is necessary. Consult your dealer.³To use the DV STUDIO2 software via USB, acomputer with Windows® 98 preinstalled isnecessary.³Pictures that you intend to import from cassetteinto computer applications should be recorded inthe SP Mode.³When recording, take care that the Time Code isuninterrupted from the beginning of the tape.³For detailed explanations on the operatingenvironment, connections and operations, referto the Personal Computer Connection Kit’soperating instructions.³Windows® is a trademark of MicrosoftCorporation U.S.A.³All other company and product names in theoperating instructions are trademarks of theirrespective corporations.1[S-VIDEO OUT][AV OUT][D.STILL PICTURE][IR TRANSMITTER][DIGITAL STILL PICTURE]21 pin Adaptor2Interface Box1AC Adaptor2S-VIDEO OUTEDITAV OUT/PHONESD.STILLPICTUREE

/ 39

Related manuals for Panasonic NV-DS12B