Panasonic NV-GS140EP Operating Instructions Manual

Also see for NV-GS140EP: Service manual Service manual

Contents

Playback mode36VQT0P88Playback on TVImages recorded by this camera can be playedback on a TV.≥Insert a recorded tape into this camera.1 Connect the movie camera and a TV.≥Connect the movie camera and a TV by usingthe AV cable 1.≥If the TV has an S-Video terminal, then alsoconnect an S-Video cable 2 (optional). Itallows you to enjoy more beautiful images.2 Turn on this camera and set the mode dialto the Tape Playback Mode.3 Select the input channel on the TV.4 Move the joystick up to select the [1/;]icon to start playback.≥The image and audio are output on the TV.5 Move the joystick down to select the [∫]icon to stop playback.≥Whenever plugging in the S-Video cable, plug inthe AV cable, too.≥Use the AC adaptor to free you from worryingabout the battery running down.ª If the image or audio from this camerais not output on the TV≥Check that the plugs are inserted as far as theygo.≥Check the connected terminal.≥If the image does not appear on the TV even if[BASIC] >> [AV JACK] >> [OUT/Ë] are set,then set to [OUT]. (-45-)≥Check the TV’s input setting (input switch).(For more information, please read theoperating instructions for the TV.)ª To display the on-screen informationon the TVThe information displayed on the LCD monitor orthe viewfinder (operation icon, time code andmode indication, etc.), date and time can bedisplayed on the TV.1 Press the [OSD] button on the remotecontrol.≥Press the button again to erase the OSDinformation.Playing back card≥Set to Picture Playback Mode.1 Operate with joystick.E: Plays back the previous picture.D: Plays back the next picture.1/∫: Slide show (Plays back the still pictureson the card in order) start/stop≥While the data on a card are played back, donot operate the mode dial.≥When the access lamp is lit, do not insert orremove a card.≥It takes time to display the file depending on thenumber of pixels of the file.≥If you attempt to play back file recorded in adifferent format or file data is defective, thewhole display becomes bluish and the“UNPLAYABLE CARD’’ indication may appearas warning.≥When playing back a file recorded on otherequipment, the date and time display is differentfrom when it was recorded.≥When playing back a picture recorded on otherequipment, its size and that of this moviecamera may appear differently.1 2[VIDEO IN][AUDIO IN][S-VIDEO IN]AV/S-VIDEOOSD DATE/TIMEZOOMPHOTOSHOTSTART/STOPPC