Menu32LSQT1008Menus related to taking picturesª [DATE/TIME]This switches between date and time indications.≥The movie camera automatically records thedate and time of picture taking on the tape.ª [AUDIO REC]Switches the audio (PCM audio) recordingsystems.[12bit]: Records audio in “12 bit 32 kHz 4 tracks”.(The original sound recorded is preservedafter audio dubbing.)[16bit]: Records audio in “16 bit 48 kHz 2 tracks”.Audio can be recorded in higher quality.(The original sound recorded is erasedafter audio dubbing.)≥Audio dubbing cannot be performed on this unit.If you want to edit the sound on a model with anaudio dubbing function, set [12bit] to takepictures.ª [DISPLAY]Set to [ON] and the display mode can be switchedto all functions. Set to [OFF] and it can beswitched to minimum display.ª [BEEP SOUND]Set to [ON] and confirmation/alarm beeps areissued as follows.1 Beep≥When you start recording≥When you turn on the power≥When the unit goes from quick start standbymode to recording pause2 Beeps≥When you pause recording≥When you turn off the power≥When the unit goes into quick start standbymode2 Beeps for 4 times≥When a cassette with its erasure prevention tabset to [SAVE] is inserted, condensation occurs(-38-), and at other times. Check the sentencedisplayed on the screen. (-34-)ª [POWER SAVE][OFF]: When about 5 minutes passedwithout any operation, the standbymode automatically will be set. Inthe standby mode, [;] blinks andit takes time more than usual tostart recording after you press therecording start/stop button.[5 MINUTES]: When about 5 minutes passedwithout any operation, the moviecamera automatically turns off toprotect the tape or to prevent thebattery from running down. Whenyou use the movie camera, turn iton again.≥In the following cases, the power may not turnoff even when set [POWER SAVE] >>[5 MINUTES].≥When connecting to the AC outlet(When using the AC adapter)≥When connecting the USB cable or the DVcable to a personal computer or otherequipmentLSQT1008ENG.book 32 ページ 2006年1月18日 水曜日 午前10時4分