Panasonic NV-GS44 Operating Instructions Manual

Contents

Others-47-[F] means Fine, [N] meansNormal and [E] means Economy.-21-, , , : MPEG4 Picture Quality -22-0: Remaining Number of PhotoshotpicturesR:0h00m: Remaining time of MPEG4: Continuous Photoshot Recording-22-: Lock Setting -38-¥ (White): DPOF Setting completed (set to1 or more picture) -38-: [640k480] Image size≥For images not recorded with this MovieCamera, the size display is determined asfollows according to the number of horizontalpixels.: 640 or more, less than 800 (Thesize is not displayed at under640 pixels.): 800 or more, less than 1024: 1024 or more, less than 1280: 1280 or more, less than 1600: 1600 or more, less than 2048: 2048 or more(Cyan): Photoshot Mode(Red): While Photoshot recording isactivated(Green): While the card isbeing read(Red): No Card (Still Picture Mode)(Cyan): Moving Picture (MPEG4)Recording Mode(Red): While Moving Picture (MPEG4)recording is activatedª To Change the Counter Display ModeBy changing [C.DISPLAY] on the [DISPLAY]Sub-Menu, you can change the Counter DisplayMode to Tape Counter Indication [COUNTER](0:00.00), Memory Counter Indication [MEMORY](M0:00.00), and Time Code Indication[TIMECODE] (0h00m00s00f). (-15-) By repeatedlypressing the [DISPLAY] Button on the RemoteController, you can change the Counter DisplayMode.ª To Display Date/Time IndicationTo display Date/Time Indication, set theappropriate Date/Time in [DATE/TIME] on the[DISPLAY] Sub-Menu. (-15-)You can also press the [DATE/TIME] Button ofthe Remote Controller repeatedly to display orchange the Date/Time Indication.ª To Change the Display ModeBy changing [DISPLAY] on the [DISPLAY]Sub-Menu, you can change the Display Mode toE N F SF640640SVGAXGASXGAUXGAQXGAPICTUREPICTUREPICTUREPICTUREMPEG4MPEG4All Function Display [ALL] and Minimum Display[OFF]. (-15-)ª Progressive PhotoshotYou cannot use the Progressive PhotoshotFunction in the following cases.When using Tape Recording Mode≥Digital Effect Modes in [EFFECT1]≥Digital Zoom [D.ZOOM]≥1/750 s or faster shutter speed≥When brightness is insufficient≥When the Night View Function is ON≥When the Portrait Mode is usedWhen using Card Recording Mode≥When brightness is insufficient≥When the Night View Function is ONInitializing the ModesYou can change the Menu settings back to theshipping condition.1 Set [INITIAL] >> [INITIAL SET] >> [YES].≥The initializing takes a little while.≥After the initializing is completed, the[COMPLETED] Indication appears withbeeps.≥Initializing will not erase the clock setting (-18-)that has been adjusted.Warning/Alarm IndicationsIf any one of the following indications lights up orflashes, please check the condition of the MovieCamera.3DEW (DEW DETECT/EJECT TAPE):Condensation has occurred. -55-Y (CHECK REC TAB/TAPE NOT INSERTED):You are attempting to record pictures on aTape with setting the accidental erasureprevention slider to [SAVE].You are attempting Audio dubbing or Digitaldubbing on a Tape with setting theaccidental erasure previntion slider to[SAVE].No Cassette is inserted. -12-6 (LOW BATTERY):The Battery is low. Recharge it. -9-0: The built-in battery is low. -18-: (NEED HEAD CLEANING):The video heads are dirty. -56-2END (TAPE END):The tape came to the end during recording.REMOTE (CHECK REMOTE MODE):Wrong Remote Controller Mode has beenselected. -9-UNPLAYABLE TAPE(OTHER FORMAT):You are attempting to play back a tape