Panasonic NV-GS44 Operating Instructions Manual

Contents

Others-52-≥The top and bottom of the Multi pictures will becut off slightly.ª Playing BackRepeat PlaybackIf you continue to press the [1] Button for5 seconds or longer, the Movie Camera switchesto Repeat Playback Mode, and the [R !]Indication appears. (To cancel Repeat PlaybackMode, set the [OFF/ON] Switch to [OFF].)Listening to Playback Sound throughHeadphonesIf you want to use the headphones to listen to theplayback sound, set [AV JACK] to[OUT/PHONES] and connect the headphones tothe [PHONES] Socket (-7-) on the Movie Camera.In this case, no sound (including warning andshutter sounds) will be reproduced through thebuilt-in speaker of the Movie Camera.Choosing Sound during PlaybackYou can select the sound by using the[AUDIO OUT] setting on the [PLAYBACK]Sub-Menu.STEREO: Stereo Sound (main sound andsub sound)L: Left channel sound (main sound)R: Right channel sound (sub sound)≥If you dub a tape recorded at the [12bit]selected as the [AUDIO REC] on the[RECORDING] Sub-Menu, playback soundbecomes stereo sound regardless of the[AUDIO OUT] setting if [12bit AUDIO] is set to[MIX].ª Index Search Functions≥Index Search may not be possible at thebeginning of the tape.≥Scene Index Search may not function properly ifthe interval between 2 scene index signals isless than 1 minute.ª Playback Zoom Function≥You cannot adjust the sound volume with theRemote Controller in Playback Zoom Mode.≥If you turn off the Movie Camera power or if youoperate the Mode Dial, Playback Zoom Mode isautomatically cancelled.≥Even if Playback Zoom Functions are beingused, images that are output from the DVTerminal (-7-) are not enlarged.≥As you enlarge an image, the quality of theimage deteriorates.≥During a Playback Zoom, the Variable SpeedSearch Function cannot be changed with theRemote Controller.ª Playback Digital Effect Functions≥Signals of images to which digital effects areadded during playback cannot be output fromthe DV Terminal (-7-).≥You cannot use the Wipe or Mix Function whileplaying back the non-recorded portion of tape.ª Playing Back a Card≥If a blank (nothing recorded) Card is played, thescreen becomes white.≥If you attempt to play back a file recorded in adifferent format or a file data is defective, thewhole display becomes bluish and the[UNPLAYABLE CARD] Indication may appearas warning.≥When playing back a picture recorded on otherequipment, its size and that of this MovieCamera may appear differently.≥When playing back a picture recorded on otherequipment, the picture may not be played backor the quality of pictures may be deteriorated.≥When playing back a nonstandardized file, theFolder File Number may not be displayed.≥In the following cases, black bars may appear,depending on the playback device.≥When playing back a mega-pixel still-picturewith this Movie Camera and recording itonto a tape≥Changing the picture size to 640k480 withDV STUDIO≥The file format supported by this Movie Camerais ASF. (Not all the ASF formatted files will beplayed back.)≥When you set [SCREEN] on the [DISPLAY]Sub-Menu to [NORMAL] in playing backMPEG4 moving pictures, they are displayedsmaller. This is not a malfunction.≥Moving pictures are kept still duringCue/Review playback. Only the counter numberincreases or decreases.≥MPEG4 data cannot perform Slow MotionPlayback (forward direction and reversedirection), Still Advance Playback (forwarddirection and reverse direction) or Playback withZoom Lever.≥If you try to play back on other Panasoniccameras an MPEG4-recorded image for whichthe [MPEG4 MODE] was set to a mode otherthan [ECONOMY], this image will not bedisplayed, and the indication [PLEASERE-OPERATE AFTER PUSHING RESETBUTTON], etc., may appear. This is not amalfunction.≥For the MPEG4 moving pictures recorded onother equipment, [UNPLAYABLE CARD]Indication may be displayed when they areplayed back. If the [1] Button is pressed in thiscase, [!] will be displayed for a few secondsand the next image will be displayed.≥The MPEG4 data cannot be output from the DVTerminal.