Panasonic NV-GS44 Operating Instructions Manual

Contents

Others-53-≥When playing back a MPEG4 data recorded onother equipment, a part of the playback elapsedtime may be indicated as [--] or the date andtime display is different from it when recorded.≥If you attempt to play back a file recorded onother equipment, the [UNPLAYABLE CARD]Indication may appear and the playback maynot be possible. Or during playback, the[UNPLAYABLE CARD] Indication may appear,the playback picture may be presented in atime-lapse-like manner, or the picture and thesound may not synchronize.ª Slide Show≥It may take playback time longer than usualtime depending on the picture.ª Creating a Title≥When setting to MPEG4 Playback Mode, TitleCreation Function is not possible.≥Even if the contrast of the Title is adjusted, theportions where there is little difference betweenlight and dark and where the boundary betweenlight and dark is unclear may not appear.≥The Title may not appear well if somethingsmall is used for it.≥If titles are created, the number of images thatcan be recorded on a Card decreases.≥If the number of images that can be recorded ona Card is small, you may not be able to create atitle.ª Adding a Title≥When setting to MPEG4 Playback Mode, TitleIn Function is not possible.≥Original titles are added after the preset titles.≥The Title In Function and Digital Effects cannotbe used simultaneously.≥The Title In Function and Continuous Photoshotcannot be used simultaneously.≥When a title is displayed in Tape PlaybackMode, the title is not output from the DVTerminal.≥The Multi-Picture Mode cannot be used oncethe title is inserted.≥A full-coloured title made on other equipmentcannot be played back or added to the picturewith this Movie Camera.≥A title with size of other than 640k480 cannotbe displayed.≥When recording MPEG4 moving pictures is inprogress, Title in Function cannot be used.≥When the title is displayed on the Multi screen,the recording and the playback cannot beperformed.≥During external input or DV input, you cannotuse Title In Function or display titles on the Multiscreen. Select the desired titles to display themon the screen before connecting the cable tothe Movie Camera.ª DPOF≥Perform the DPOF Settings with your ownMovie Camera in use.≥Verifying the DPOF Settings may take a littletime. Wait until the Card Access Lamp goes out.ª Lock Setting≥The Lock Setting carried out by this MovieCamera is only effective for this Movie Camera.≥The SD Memory Card has a write protectionswitch on it. If the switch is moved to the [LOCK]side, you cannot write to or format the Card. If itis moved back, you can.≥The MPEG4 data recorded by another MovieCamera may not be able to cancel the locksetting.ª Playing Back on Your TV≥Depending on your TV, nothing may be showneven if you correctly connect the movie camerawith your TV. In this case, set [AV JACK] on the[AV IN/OUT] or [INITIAL] Sub-Menu to [OUT].≥If you set [AV JACK] on the [AV IN/OUT]Sub-Menu to [IN/OUT], nothing will be shownon the TV screen except during playback.(NV-GS55 only)≥Picture size may be displayed differently whenplaying back a Cinema picture on a wide-screenTV with Playback Digital Effect.≥We recommend you to set [SCREEN] on the[DISPLAY] Sub-Menu to [NORMAL] whenplaying back MPEG4 on TV.ª Recording Pictures from a Card onto aTape≥When recording the Card Image on a Tape, itssize is transformed into 720k576 according tothe DV format.≥If you attempt to record a still picture with alarge image size on a Tape, there may be areduction in the quality of the image.≥The MPEG4 data cannot be recorded on a Tape.ª Audio Dubbing≥The blank section of a tape cannot be dubbed.≥Sounds sent through the DV Terminal cannotbe dubbed.≥If a tape has a non-recorded portion when thetape is dubbed, images and sounds may bedisturbed when this portion of the tape is playedback.≥If you set the tape counter back to 0 at theposition where you want to stop Audio Dubbingso as to make it possible to use the MemoryStop Function (-60-), Audio Dubbing isterminated automatically when the tape reachesthis position.≥In the case of importing data recorded withAudio Dubbing to a PC using the PC’s software,only the original sound (ST1) may be imported,depending on the software.