Panasonic NV-GS90 Operating Instructions Manual

Also see for NV-GS90: Operating instructions

Contents

Menu39LSQT1291Menus related to taking picturesª [DATE/TIME]This switches between date and time indications.≥The movie camera automatically records thedate and time of picture taking on the tape.ª [AUDIO REC]Switches the audio (PCM audio) recordingsystems.[12bit]: Records audio in “12 bit 32 kHz 4 tracks”.(The original sound recorded is preservedafter audio dubbing.)[16bit]: Records audio in “16 bit 48 kHz 2 tracks”.Audio can be recorded in higher quality.(The original sound recorded is erasedafter audio dubbing.)≥Audio dubbing cannot be performed on this unit. Ifyou want to edit the sound on a model with anaudio dubbing function, set [12bit] to take pictures.ª [DISPLAY]Set to [ON] and the display mode can be switchedto all functions. Set to [OFF] and it can beswitched to minimum display.ª [BEEP SOUND]Set to [ON] and confirmation/alarm beeps areissued as follows.1 Beep≥When you start recording≥When you turn on the power≥When the unit goes from quick start standbymode to recording pause2 Beeps≥When you pause recording≥When you turn off the power≥When the unit goes into quick start standbymode2 Beeps for 4 times≥When a cassette with its erasure prevention tabset to [SAVE] is inserted, condensation occurs(-45-), and at other times. Check the sentencedisplayed on the screen. (-41-)ª [POWER SAVE][OFF]: When about 5 minutes passedwithout any operation, the standbymode automatically will be set. Inthe standby mode, [;] blinks andit takes time more than usual tostart recording after you press therecording start/stop button.[5 MINUTES]: When about 5 minutes passedwithout any operation, the moviecamera automatically turns off toprotect the tape or to prevent thebattery from running down. Whenyou use the movie camera, turn iton again.≥In the following cases, the power may not turnoff even when set [POWER SAVE] >>[5 MINUTES].≥When connecting to the AC outlet(When using the AC adapter)≥When connecting the USB cable or the DVcable to a personal computer or otherequipmentMenus related to playbackª [12bit AUDIO]If you want to edit the sound on a model with anaudio dubbing function, set [12bit] to takepictures.You can switch the sound (PCM Audio) whenplaying back a tape with sound recorded in[12bit].[ST1]: It only plays back the original soundrecorded.[ST2]: It only plays back the sound on the tapeadded with audio dubbing.[MIX]: It simultaneously plays back both [ST1]and [ST2] sounds.≥Audio dubbing cannot be performed on this unit.When playing back a tape recorded on this unit,you will not be able to hear the sound if [ST2] isset. Set [ST1].ª [AUDIO OUT]This switches the sound to be played back.[STEREO]: Stereo sound (main sound and subsound)[L]: Left channel sound (main sound)[R]: Right channel sound (sub sound)Other menusª [INITIAL SET]When there is a menu that cannot be selecteddepending on a combination of functions, set to[YES] for changing the menu settings back to theinitial shipping condition.(Language setting cannot be back to the initialshipping condition.)ª [DEMO MODE]If you set to [DEMO MODE] >> [ON] withoutinserting a cassette, the movie camera isautomatically set to the demonstration mode forintroducing its functions. If any button is pressedor operated, the demonstration mode iscancelled. If no operations take place for approx.10 minutes, the demonstration modeautomatically starts. To terminate thedemonstration mode, insert a cassette, or set to[DEMO MODE] >> [OFF]. For normal use, set thisfunction to [OFF].