Before using9LSQT1291Using the lens coverFor the lens protection, be sure to close the lenscover when not in use.1 Slide the lens cover open/close switch to[ ].Power supplyª Charging the batteryWhen this product is purchased, the battery is notcharged. Charge the battery before using this product.≥Battery charging time (-11-)≥We recommend using Panasonic batteries. (-6-)≥If you use other batteries, we cannot guaranteethe quality of this product.≥If the DC input lead is connected to the ACadaptor, then the battery will not get charged.Remove the DC input lead from the AC adaptor.1 Connect the AC mains lead to the ACadaptor and the AC mains socket.2 Put the battery on the battery mount byaligning the mark, and then securely plug it in.ª Charging lampLights up: ChargingGoes off: Charging completedFlashing: When the battery temperature isexcessively high or low, the lampflashes and the charging time will belonger than normal. Remove dirt,foreign objects or dust on theterminals of the battery or the ACadaptor. If the lamp is still flashing,something may be wrong with thebattery or AC adaptor.Contact your dealer.It has been found that counterfeit battery packswhich look very similar to the genuine productare made available to purchase in somemarkets. Some of these battery packs are notadequately protected with internal protection tomeet the requirements of appropriate safetystandards. There is a possibility that thesebattery packs may lead to fire or explosion.Please be advised that we are not liable for anyaccident or failure occurring as a result of use ofa counterfeit battery pack. To ensure that safeproducts are used we would recommend that agenuine Panasonic battery pack is used.≥Be aware that many batteries sold atextremely cheap prices or in situations whereit is difficult to verify the actual productsbefore purchase have proven to becounterfeit.12