Panasonic NV-MS5A Operating Instructions Manual

Also see for NV-MS5A: Operating instructions Operating instructions

How to Edit a Previously Recorded Tape0ITS-VIDEOOUTnosecretCisORR2)DC IN 12VAUDIOL—OUT—A(not supplied)—=To Audio InputSocket (R)ToVideo InputSocketTo Audio InputSocket (L.)REMOTE EDITSVIDEOOUTingseueceeoPEEhatOC IN 12V(not supplied)To Audio Input Socket (R)To Audio Input Socket (L)To Video input SocketTo S-Video Input SocketB Connections1 Connect the Movie Camera to a VCR.Using the Supplied AV Output Cablem@ OperationsMovie Camera1, Insert a recorded Video Cassette into the MovieCamera.2. Press the [PLAY] Button.(and if necessary the [©+)FF] or [REW/[=]] Button to locate thescene from where the dubbing is to start.}3. Press the [PAUSE] Button at the point where thedubbing is to start.VCR4. Insert a Video Cassette with intact erasureprevention tab into the VCR.lf your VCR is equipped with SP and LP modes. it isrecommended to use the SP mode.5. Press the Record Button to start recording.6. Press the [PAUSE] Button to start the playback.= [=} = fe)o 3 o g EoVCR7. Press the Pause/Still Button at the exact positionwhere the recording is to end.The VCR is now in the Recording Pause Mode.8. Locate the beginning of the next scene to bedubbed, and press the [PAUSE] Button at that point.VCR9. Press the Pause/Still Button again to resumerecording.Repeat the operation steps 6 to 9 for eachadditional scene to be edited.@ Connections1 Connect the Movie Camera to a VCR.Using the Supplied S-Video CableB OperationsThe operation is the same as the operation described above.2 Edit SocketBy connecting an Editing Controller (optional) to this socket aswell as to a VCR equipped with Edit Socket, highly preciseand speedy editing becomes possible.