Panasonic NV-MX1B Operating Instructions Manual

Also see for NV-MX1B: Operating instructions Operating instructions Manual

Advanced Operations4746TitleProcedureRemarks, etc.CAMERA FUNCTIONSPRESS MENU TO EXIT1.CAMERA SETUP2.DIGITAL EFFECT3.CARD SETUP4.MULTI-PICTURES5.RECORDING SETUP6.DISPLAY SETUP7.OTHER FUNCTIONS8.DEMO MODESCAN MODESPEED FAST NORMAL SLOWRETURN ---- YESSTROBE MANUALSWING OFF ONP-IN-P 1 2 3 4MULTI-PICTURESPRESS MENU TO EXITMULTI/P-IN-PMENUPUSH W.B/SHUTTER/IRIS/VOL/JOG12Recording with Special Effects(Digital Effects) (Continued)∫ Manual Multi-Picture ModeWith this function, you can capture up to 9 small stillpictures and display them together on the samescreen.1After setting [EFFECT1]on the [DIGITALEFFECT] Sub-Menu to[MULTI]... (p. 52)Press the [MENU]Button.2Turn the [PUSH] Dial toselect [MULTI-PICTURES] and thenpress the [PUSH] Dial.The [MULTI-PICTURES]Sub-Menu appears.3Turn the [PUSH] Dial toselect [SCAN MODE]and then press the[PUSH] Dial to select[MANUAL].Making All Multi-Pictures DisappearAfter displaying 9pictures, it is possible tomake them disappear inone go by pressing the[MULTI] Button.4Press the [MENU]Button to exit theMenu.Displaying the Multi-Pictures AgainPress the [MULTI] Buttonfor more than 1 second.Notes for Using the Multi-Picture Mode≥It is not possible to use the Multi-Picture Mode when[PROGRESSIVE] on the [CAMERA SETUP] Sub-Menu is set to [ON].≥The Multi-Picture Mode cannot be used while theDitigal Still Picture Mode is used.≥The Multi-Picture Mode cannot be used during theMega-Pixel Setting. (p. 82) (NV-MX5, NV-MX7 only)≥When using the Mirror Mode (p. 31) with the LCDMonitor facing forward, pressing the [MULTI] Buttondisplays the still pictures starting at the top rightcorner of the screen.≥The quality of the pictures recorded in the Multi-Picture Mode is slightly inferior.≥To record the displayed still pictures in the Multi-Picture Mode onto the tape, press the RecordingStart/Stop Button or the [PHOTO SHOT] Button.Erasing the Multi-Pictures One by OneWhile the multi-pictures are displayed, press the[MULTI] Button for more than 1 second.≥This erases the last captured picture. Keeping the[MULTI] Button pressed erases the picturescontinuously.≥After you have erased the still pictures one by one, itis not possible to display them again.5Press the [MULTI] Button once, and then again foreach of the scenes that you want to capture in theMulti-Picture Mode.MENU 12 12 MENUMULTI/P-IN-P MULTI/P-IN-P MULTI/P-IN-P