Basic Operations1415TitleProcedureRemarks, etc.3Press the [PUSH] Dialto display the selectedSub-Menu.Notes About the Settings Made on the MenuThe settings you selected on the Menu are maintainedwhen you turn the Movie Camera off. However, if youdisconnect the power supply unit (Battery or ACAdaptor) from the Movie Camera before turning it off,the selected settings may not be maintained.≥While the Menu is displayed, recording or playback isnot possible. During playback, displaying Menu ispossible, but not during recording.≥Settings for the menu item(s) that cannot be used dueto the combination of the selected functions aredisplayed in dark blue.≥You can also perform these operations by using theRemote Controller. (p. 104)12Exiting the MenuPress the [MENU] Button again.4Turn the [PUSH] Dial toselect the item to beset.MENUPUSH W.B/SHUTTER/IRIS/VOL/JOG12CAMERACARD P.BVCRMODEONOFFUsing the Menu ScreenThis Movie Camera displays the settings of variousfunctions in Menus to make it easy to select thedesired functions and settings.1Press the [MENU] Button.When the [CAMERA] Lamp is lit, Camera Mode Menuis displayed. 1When the [VCR] Lamp is lit, VCR Mode Menu isdisplayed. 2When the [CARD P.B] Lamp is lit, Card PlaybackMode Menu is displayed. 3 (NV-MX5, NV-MX7 only)2Turn the [PUSH] Dial toselect the desiredSub-Menu.Turning the [PUSH] Dialchanges the highlighteditem.5Press the [PUSH] Dialto set the selected itemto the desired mode.Every press moves thecursor [1] to the nextmode.12CAMERA FUNCTIONSPRESS MENU TO EXIT1.CAMERA SETUP2.DIGITAL EFFECT3.CARD SETUP4.MULTI-PICTURES5.RECORDING SETUP6.DISPLAY SETUP7.OTHER FUNCTIONS8.DEMO MODEVCR FUNCTIONSPRESS MENU TO EXIT2.DIGITAL EFFECT1.PLAYBACK FUNCTIONS3.CARD SETUP4.MULTI-PICTURES5.RECORDING SETUP6.AV IN/OUT SETUP7.DISPLAY SETUP8.OTHER FUNCTIONSCARD FUNCTIONSPRESS MENU TO EXIT1.CARD PLAYBACK2.ERASE PICTURE/TITLE3.CARD EDITING4.DISPLAY SETUP5.OTHER FUNCTIONS1 Camera ModeMain-Menu 2 VCR Mode Main-Menu 3 Card Playback ModeMain-MenuMENUMENU 1212