Panasonic Omnivision PV-V4622 Operating Instructions Manual

Also see for Omnivision PV-V4622: Service manual

Contents

22 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.comMulti-Brand Control FeatureThe Remote Control can be set to control some TV andCable box/DSS functions.Find your TV and Cable Box/DSS Receiver BrandCode Number on the following page.Setup for TV control,➛➛➛➛➛ hold down TV button,➛➛➛➛➛ enter code with NUMBER keys.Multi-Brand Control SetupConfirm code entry,➛➛➛➛➛ press POWER to turn selected unit on or off.• See table below for controllable functions in each mode.Setup for Cable or DSS control,➛➛➛➛➛ hold down DSS/CABLE button,➛➛➛➛➛ enter code with NUMBER keys.• If code number is 100 or greater,➛➛➛➛➛ press 100 key, then other digits.E.g., press 100 - 0 - 2 for 102.31• Repeat setup after remote battery replacement.• Remote will not control every TV, cable box, orDSS made by the manufacturer listed. If you getno response, your particular unit cannot becontrolled. There are NO additional codes for theproducts listed. If your product is not listed, thenthe remote is not compatible with that product.2Mode Unit VCR TVVCRTVAll VOL UP/DOWNPOWER, INPUT,number keys,ENTER, CHUP/ DOWN,VOL UP/DOWNVCR/TV, PLAY,STOP EJECT,SAP/ Hi-Fi,DISPLAY, FF,REW, PAUSE/SLOW, REC,SPEED, CA/ZERO,COUNTERRESET, TAPEPOSITIONAfter remote is set up, you can select VCR, TV, or DSS/CABLE for the desired function.Press VCR, or TV, or DSS/CABLE on the remote.(Table below shows available unit buttons for each mode.)CABLE/ DSSUsing Multi-Brand ControlCABLE/DSSVOL UP/ DOWN POWER, ENTER,number keys(except 100key),CH UP/ DOWN• Not all functions listed may be controllable.• In TV or DSS/CABLE mode, it may be necessary to press ENTER after pressingNUMBER keys for channel selection.TVDSS/CABLENUMBERkeysPOWERENTERNotesNotes