Panasonic Omnivision PV-V4622 Operating Instructions Manual

Also see for Omnivision PV-V4622: Service manual

Contents

25MONO broadcastNormal monaural sound broadcast.SAP broadcastSecondary Audio Program (sub language)broadcast. Select SAP audio mode for thesub language.MTS Stereo broadcastMulti-channel Television Sound Stereobroadcast. Select STEREO audio mode.• If stereo broadcast is weak and displayflickers, select MONO audio mode forpossibly better results.MTS Stereo and SAP broadcastMulti-channel Television Sound Stereo (mainlanguage) and Secondary Audio Program(sub language) broadcasts are beingreceived simultaneously. Select STEREO orSAP audio mode.The following are possible audio broadcast types and on-screendisplays. The signal being received is indicated with an “ ” markwhile the selected audio mode is indicated with an arrow.Receivable Broadcast TypesAudio Mode for Recording12Do a recording.See page 15.3• Arrow indicatesselection.STEREOSAPM ONOST OP 1 2 : 0 0 A M ABC0 : 0 0 : 0 0SPSTER EOSAPMONOST OP 1 2 : 0 0 A M ABC0 : 0 0 : 0 0SPSTER EOSAPMONOST OP 1 2 : 0 0 A M ABC0 : 0 0 : 0 0SPSTER EOSAPMONOST OP 1 2 : 0 0 A M ABC0 : 0 0 : 0 0SPSTER EOSAPMONOMTS Broadcast/ VHS Hi-Fi Stereo SystemAudio Mode for PlaybackStart playback.See page 14.• Only tapes recorded in Hi-Fi stereo will playback with true stereo sound. Standard stereotapes will playback in monaural sound.• To listen to Hi-Fi stereo playback, the VCR AUDIO (L/R) jacks must be connected to astereo TV or an external stereo amplifier and speakers. (See top of this page.)• If tracking is adjusted during playback, Hi-Fi audio may revert to normal audio.• Hi-Fi and normal audio playback volume level may differ.• Arrow indicatesselection.Equipped with ®-TV NoiseReduction for true MTSreproduction. ®-TV NoiseReduction is required for goodstereo separation and audiofidelity. ® is a registeredtrademark, and is licensed by® Technology Licensing.• Select “HIFI(L/R)” or“HIFI(L)” or “HIFI(R)”to listen to stereorecordings in stereosound. Select“NORMAL” formonaural sound.Stereo AmplifierAUDIO INRLVCRRLROUT TO TVVHF/UHFTVRLAUDIO OUTDISPLAYSAP/Hi-FiConnectionMake the Audio/Video Connection as shown on theprevious page.• You can use a TV connected to a Stereo amplifier andspeakers instead of a Stereo TV.To display the broadcast signal being received,➛➛➛➛➛ press DISPLAY.Press SAP/ Hi-Fito display audio mode.(Display disappears after 5 seconds.) Press SAP/ Hi-Fito display audio mode.(Display disappears after 5 seconds.)Press SAP/ Hi-Firepeatedly toselect desiredmode.123 H I F I : L / RH I F I : LH I F I : RN ORMALNotesAdvancedOperationPress SAP/ Hi-Firepeatedly to selectdesired mode.• Refer to “ReceivableBroadcast Types” above.