Basic operationsHold down [POWER] for at least 1 second.The power display LED lights, and the power is turned on.When [POWER] has been held down for more than 2 seconds while the power is on, the power displayLED will go off, and the power will be turned off.••Turning the power on and off1 Hold down [POWER] for at least 1 second to turn the power on. Raise the LCD monitor while pressing the LCD monitor open button in the direction shown bythe arrow.AG-HPG20 AG-HPG20 Set the LCD screen to the angle where it is easiest to see its displays.AG-HPG20 AG-HPG20Make sure that the LCD monitor is raised upright before turning it.EXIT/2ALT/31USERSETTHUMBNAIL/MODEMENU/MODE CHKRECPAGE / AUDIO MON / VARPOWER COUNTERRESETUsing the LCD monitorIn the clockwisedirection, the screencan be turned up to 90degrees.The monitor cannotbe turned more than90 degrees. Applyingexcessive force beyondthis limit may causedamage the unit.•Turn the LCD monitorscreen 180 degreescounterclockwise so thatit is facing the front.The monitor cannotbe turned more than180 degrees. Applyingexcessive force beyondthis limit may causedamage the unit.•10º 0ºLCD monitor screen LCD monitor screen10º The LCD monitor screenwill not tilt more than120 degrees toward thefunction buttons.Applying excessiveforce beyond this limitmay cause damagethe unit.•Once the LCD monitorscreen is positioned toface the front, it cannotbe turned any furtherin the counterclockwisedirection.Applying excessiveforce beyond this limitmay cause damagethe unit.•Function buttons
