Panasonic PT-4743 Operating Instructions Manual

Also see for PT4743G - 56" PROJECTION TV HD: Service manual Service manual Service manual

Contents

Panasonic PT-4743 Operating Instructions Manual Manual pdf 19 page image

REMOTE CONTROL OPERATION (MOD ELS PT-47/53/56WX53, PT-53/56TW53 AN D PT-4743)17 lENGLISHProgramming the RemoteThe Universal Remote Control can be programmed tooperate many manufacturers’ components, using thecomponent function buttons for VCR, DVD, AUX, RCVR,TV, DTV CABLE or DBS. Follow the procedures forprogramming your Remote Control with or without a codefor the component.Note: Determine the manufacturer of the component and lookin the table for the code.Programming with a CodeProcedure• Confirm that the external component is plugged inand operating.• Turn the component off.• Press and together, for at least 5seconds.• Press appropriate component button on theRemote Control VCR, DVD (CD), AUX (VCR2 orTAPE), RCVR, DTV, CABLE or DBS.• Enter the 3-digit component code using theRemote Control numeric keypad (0 - 9 buttons).• Press the Remote Control to test thecomponent. If the procedure was successful, thecomponent will turnon.Note: If the component does not operate with the RemoteControl, repeat the procedure using another code.(Some brands have multiple codes). If an incorrect codeis entered, or if the procedure takes longer than 30seconds, the programming will fail.Programming without a CodeThis procedure searches all codes and is called the“sequence method.”Procedure• Confirm that the external component is plugged inand on.• Turn the component off.• Press and together, for at least 5seconds.• Press appropriate component button on theRemote Control.• Press VOL u to move forward to the next code.Presst VOL to move backward.• Press the Remote Control to test thecomponent. If the procedure was successful, thecomponent will turn on.Note: Repeat the above steps until the component code isfound. it may take many attempts before the correctcode is found.Component CodesThe Universal Remote Control is capable of operatingmany component brands after entering a code. Somecomponents may not operate because the codes are notavailable due to limited memory. The Universal RemoteControl does not control all the features found in eachmodel.Default Modes for Remote ControlDevice Operates DefaultTV TV (Panasonic Only) Panasonic TV CodeDTV-STB DTV (Panasonic Only) Panasonic DTV CodeCABLE CABLE (Preset) Panasonic CABLECodeDBS DBS (Preset) Panasonic DBS CodeVCR VCR (Preset0 Panasonic VCR CodesDVD/CD DVD and CD (Preset) Panasonic DVD CodesAUX Personal Video Recorders,Tape and VCR2 Panasonic PersonalVideo Recorder CodeRCVR Audio receiver (Preset) Panasonic RCVR codeACTION POWERPOWERWrite the code numbers from tables in this space.This will serve as a reference if you need to programyour Remote Control.VCR DVD DVD (CD)AUX (VCR2) AUX (TAPE) RECEIVERCABLE DBSACTION POWERPOWER