Panasonic PT-4743 Operating Instructions Manual

Also see for PT4743G - 56" PROJECTION TV HD: Service manual Service manual Service manual

Contents

Panasonic PT-4743 Operating Instructions Manual Manual pdf 9 page image

OPTIONAL EQUIPMENT CONNECTIONS7 lENGLISHOptional Equipment Connections (cont.)DVI (Digital Visual Interface) input connectionThe DVI/HDCP1 input on your PTV can accommodatecopy protected digital programming. The DVI/HDCP inputterminal complies with the EIA-861Profiles2 standard and isnot intended for use with personal computers. The DVI/HDCP input can be connected to an EIA/CEA 861compliant consumer electronic device, such as a set topbox or DVD player equipped with a DVI output connection3.The DVI/HDCP input is designed for best performance withHDTV signals, such as 1080i or 720p picture signals. TheDVI/HDCP input will also accept and display 480i and 480ppicture signals.Notes:1. DVI/HDCP = Digital Visual Interface / High-BandwithDigital Copy Protection.2. EIA/CEA-861 Profiles compliance covers profiles fortransmission of uncompressed digital video includinghigh bandwidth digital content protection.3. Consult your consumer electronics dealer for availabilitydetails.Follow the diagram below to connect the PTV to a set topbox or a DVD player.Procedure• Press TV/VIDEO button on the remote control to selectDIGITAL-IN input.• Connect the DVI output from the set top box or a DVDplayer to the DIGITAL IN input on the back of the PTV.• Connect the Audio Out signal from the set top box orDVD player to the L and R Audio inputs associated withthe DIGITAL IN input.Special Remote ButtonsASPECT ButtonThe ASPECT button on the remote control lets you chooseone of four display modes, depending on the formats of thereceived signal and your preferences..BBE ButtonPress this button to turn BBE VIVA 3D (available on PT-53TW53and PT-56TW53 only) or BBE sound feature On or Off.SAP ButtonPress this button to let you cycle through different audio modes. Ifyou are receiving a stereo program and you press this button, youcan cycle between STEREO and MONO.Customer Options depending on Component Input SignalINPUTSIGNAL DISPLAY ON SCREEN ASPECT BUTTONOPTIONS1080i 16:9 only No options480p (16:9) Default to 16:9 4:3, Full or Zoom (seebelow)480p (4:3) Default to FULL mode.Note: Will stretch picturehorizontally..4:3, Full or Zoom (seebelow)480i Default to JUST mode 4:3, Full, Just orZoom (see below)This will display a 4:3 pictureat its standard 4:3 size withgray side bars. (Notrecommended for viewing4:3 pictures as it may createa permanent image onscreen if displayed for aprolonged period of time.)This will expand the 4:3picture uniformly (width andheight) to full screen widthand then reposition thepicture vertically.(Recommended for letterboxpictures.)This will show picture at fullscreen size. (Recommendedfor anamorphic pictures.)This will stretch the right andleft edges of a 4:3 picture tofill the screen, The center ofthe screen will have aspectcorrection appliled. The sizeof the picture will depend onthe original signal.(Recommended for regularTV viewing.)Note: If menu is displayed while in Zoom mode, the aspectwill change to Full to display complete menu.