Panasonic PT-53X54 Operating Instructions Manual

Also see for PT47X54J - 47" PROJECTION TV: Service manual

Contents

Panasonic PT-53X54 Operating Instructions Manual Manual pdf 12 page image

10 zSPECIAL FEATURESENGLISHSpecial FeaturesASPECT ButtonThe ASPECT button on the remote control lets you chooseone of four display modes, depending on the formats of thereceived signal and your preferences.BBE ButtonPress this button to turn BBE sound feature On or Off.SAP ButtonPress this button to let you cycle through different audio modes.For example:• If receiving STEREO, SAP and MONO or receivingSTEREO and MONO only, pressing SAP button willtoggle the audio as follows:Split OperationThis feature lets you watch two different channels side byside with or without an external video source.Procedure• Press to display Split frame.• Choose channels for the SPLIT frame by pressingbutton. The right indicator ( ) will appearin Split frame, then use or the remotecontrol numeric keypad.Note: Split frame channel can only be change while rightindicator ( )is displayed in split frame.• Select channels for the Main picture by pressingor use the remote control numeric keypad.• Press to switch the SPLIT FRAME and MAINPICTURE source.• Press to view picture source status.• Press to cancel Split frame.Split Operation With a Cable BoxTo view premium (scrambled) cable channels through yourcable box in the Main Picture:Note: Use this procedure if you want to watch premium cablechannels in the Main Picture while viewing a televisionprogram or video in the Split frame.Procedure• Tune TV to Channel 3.• Press on the remote control to display Splitframe.Note: Audio is from the Main Picture only.• Verify that the Cable box is ON.• Choose channels for the Main Picture by tuning thecable box.• Choose channels for the SPLIT frame by pressingbutton, then use or the remotecontrol numeric keypad.Note: Swap is not available when using the cable box to tunechannels. If your cable box has video output, it can beconnected to the TV to allow you to use all SPLITfunctions.Customer Options depending on Component Input SignalINPUTSIGNAL DISPLAY ON SCREEN ASPECT BUTTONOPTIONS1080i 16:9 only No options480i (16:9) Default to 16:9 4:3, Full or Zoom (seebelow)480i (4:3)Default to FULL mode.Note: Will stretch picturehorizontally.4:3, Full or Zoom (seebelow)480i Default to JUST mode 4:3, Full, Just orZoom (see below)Input SignalASPECT43Image on16:9 Screen Size4:3480i or 480pThis will display a 4:3 pictureat its standard 4:3 size withgray side bars. (Notrecommended for viewing4:3 pictures as it may createa permanent image onscreen if displayed for aprolonged period of time.)480i or 480pInput SignalASPECT Image on16:9 Screen SizeZOOM169This will expand the 4:3picture uniformly (width andheight) to full screen widthand then reposition thepicture vertically.(Recommended for letterboxpictures.)480i or 480pInput SignalASPECT Image on16:9 Screen SizeFULL169This will show picture at fullscreen size. (Recommendedfor anamorphic pictures.)Input Signal ASPECT Image on16:9 Screen Size480iJUST169This will stretch the right andleft edges of a 4:3 picture tofill the screen, The center ofthe screen will have aspectcorrection applied. The sizeof the picture will depend onthe original signal.(Recommended for regularTV viewing.)Note: If menu is displayed while in Zoom mode, the aspectwill change to Full to display complete menu.STEREO J SAP J MONOSPLITSPLIT CTRLorCHCHChange Main Picture channelChange Split Frame channelorCHCHSWAPRECALLSPLITSPLITSPLIT CTRL orCHCH