Panasonic PT-56WXF90W Manual

Also see for PT-56WXF95: Operating manual Operating instructions

Contents

SPLIT SCREEN OPERA TIONSplit Screen OperationThis television includes a two tuner split screen feature. This allows watching two (2)live broadcasts at the same time with or without an external video source (VCR).Note: The Remote Control must be programmed with suppfied codes to operate the VCRand Cable Box. See Programming the Remote Control in the Remote Control QuickReference Guide.Without a VCRProcedureConnect incoming cable to antenna (ANT 1) input on back of TV.Press the SPLIT _ button on the Remote Control to display theSplit Screen.Note: The audio is for the Main Picture, only.Choose channels for the Split Screen Picture by pressing the Remote ControlSPLIT CHANNEL up/down buttons.Choose channels for the Main Picture by pressing the Remote Control CH up/down buttons or by using the numeric keypad.With a VCR and Cable BoxProcedurePress the SPLIT _ button on the Remote Control to display the Split Screen.Note: The audio is for the Main Picture only.To view scrambled channels through your Cable Box on the Split Screen:Verify the Cable Box and VCR are ON and the VCR tuned to Channel 3 or 4,depending on the VCR.Press the TV/VIDEO button on the Remote Control to select the video input foryour VCR.Press CBL button on the Remote Control to select cable box.Choose channels for the Sprit Screen by pressing the SPLIT CHANNEL up/downbuttons on the Remote Control or by using the numeric keypad.Choose channels for the Main Picture by pressing the TV button on the RemoteControl and using the numeric keypad or CH up/down buttons.With a VCR- No Cable BoxProcedurePress the SPLIT _ button on the Remote Control to display the Split Screen.Note: The audio is for the Main Picture, only.To view an external video source in the Split Screen:Press the TV/VIDEO button on the Remote Control to select the video input foryour VCR.Verify the VCR is on.Insert a tape into the VCR and push Play button to watch the video in the SpritScreen.Choose channels for the Main Picture by pressing the TV button on the RemoteControl and using the numeric keypad or OH up/down button.Note: The SWAP button switches the Sprit Screen and Main Picture source. Pressthe RECALL button for Split Screen status, onscreen.[]