INSTALLA TIONOptional Equipment Connections (Cont.)VCR and Cable Box ConnectionFollow this diagram when connecting your television to both a VCR and a cable box.TERMINALS ON BACK OF TVCOMPONENTr-- 1IL@@LAUOI_CABLES NOT SUPPLIEDNote: The remote control must be programmed with supplied codes to operate the VCR andcable box. See Programming the Remote Control in the Remote Control QuickReference Guide.Viewing a premium (scrambled) cable channelProcedure1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).2. Tune the television to Channel 3.3. Using the cable box, tune to the premium (scrambled) cable channel you want to view.Note: To use special features such as Favorite Channels and Channel Captions (see SpecialFeatures section for more information), ANT1 must be selected in the SET UP menuunder Prog Chan (Program Channels).Recording a premium (scrambled) cable channelProcedure1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).2. Press the TV/VIDEO button on the remote control to select the input ( VIDEO 1,VIDEO 2, etc.) connected to your VCR.3. Turn the VCR ON.4. Tune the VCR to Channel 3 or 4, depending on your VCR.5. Using your cable box, tune to the premium (scrambled) cable channel you want torecord.6. Begin recording.Note: To view a different channel while recording:Select ANT1 in the SET UP menu under Prog Chan (Program Channel).Press the TM/VIDEO button on the remote control to select TV mode.Tune the television to a television program (except another premium (scrambled)cable channel).[]