INSTALLA TIONOptional Equipment ConnectionsVCR ConnectionFollow this diagram whenconnecting your televisionto a VCR only.IIANT INPUT IANT OUTPUT IomingTERMINALS ON BACK OF TVSPEAKER INPUTI_J 50 W (OIN) MAXCOMPONENTVIDEO INPUTEl::LAU_IO_ iCABLES NOT SUPPLIED[]Note: The remote control must be programmed with supplied codes to operate the VCR. SeeProgramming the Remote Control in the Remote Control Quick Reference Guide.Viewing a television programProcedure1. Select ANT1 in the SET UP menu under Prog Chan (Program Channels).2. Tune the television to the television program you want to view.Viewing a videoProcedure[3 Option A1. Select ANT1 in the SET UP menu under Prog Chan (Program Channels).2. Press the TVNIDEO button on the remote control to select the video input (VIDEO 1,VIDEO 2, etc.) connected to your VCR.3. Begin the video.[_ Option B1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).2. Tune the television to Channel 3 or 4, depending on your VCR.3. Begin the video.Note: The S-VIDEO connection is optional and overrides other VIDEO connection.Recording a television programProcedureOption A (Recording end viewing the same program)1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).2. Tune the television to Channel 3 or 4, depending on your VCR.3. Using the VCR, tune to the television program you want to record.4. Begin recording.£3 Option B (Recording one program while viewing another program)1. Select ANT1 in the SET UP menu under Prog Chan (Program Channels),2. Press the TVNIDEO button on the remote control to select the video input (VIDEO 1,VIDEO 2, etc.) connected to your VCR.3. Using the VCR, tune to the television program you want to record.4. Begin recording.5. Press the TV/VIDEO button on the remote control to switch back to regular television.6. Tune the television to the television program you want to view.