PICTURE IN PICTURE (PIP) OPERATiO/_Picture In Picture (PIP) OperationThis television includes a two tuner Picture In Picture (PIP) feature. This allowswatching two (2) live broadcasts at the same time without or with an external videosource (VCR).Basic PIP OperationProcedurePress the PIP button on the remote control to display the PiPframe onscreen.Note: The audio is for the Main Picture only.1. Choose channels for the PiP frame by pressing the remote control PIP CHANNEL up/down buttons.2. Choose channels for the Main Picture by pressing the remote control CH up/downbuttons or by using the numeric keypad._\1 _ SWAP ButtonThe SWAP button switches the PIP and MainPicture source. Press the RECALL button foronscreen PIP and MainPicturesource status.PIP Operation with a Cable BoxProcedure_3 To view premium (scrambled) cable channels through your cable box in the Main Picture:Note: Use this procedure ff you want to watch premium cable channels in the Main Picture whileviewing a televisionprogram or video in the PIP frame.1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).2. Tune television to Channel 3,3. Press the PIP button on the remote control to display the PiP frame onscreen.Note: Theaudiois for the Main Pictureonly.4. Verify the cable box is ON.5. Choose channels for the Main Picture by tuning the cable box,6. Choose channels for the PIP frame by pressing the "rv button on the remote controland using the PIP CHANNEL up/down buttons.Note: Swap is not available when using the cable box to tune channels. If your cable box has a videooutput, it can be connected to the television to allow you to use all PIP functions. See theequipment manual for mere information. (Tune the PIP to the video input connected to the cablebox).[]