INSTALLATIONOptional Equipment ConnectionsVCR ConnectionFoflow thisdiagram when connecting your television to a VCR only.VCR r+o= Ii=:in0-._ , oJ++ !++.,+++--:-,+-....Note: The remote control must be programmed with supplied codes to operate the VCR. SeeProgramming the Remote Control in the Remote Control Quick Reference Guide.Viewing a television programProcedure1. Select ANT1 in the SET UP menu under Prog Chan (Program Channels).2. Tune the television to the television program youwant to view.Viewing a videoProcedure13 Option A1. Select ANT1 in the SET UP menu under Prog Chan (Program Channels).2. Press the W/VIDEO button on the remote control to select the video input (VIDEO 1VIDEO 2, etc.) connected to your VCR.3. Begin the video._3 Option B1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).2. Tune the television to Channel 3 or 4, depending on your VCR.3. Begin the video.Recording a television programProcedure[] Option A (Recording and viewing the same program)1, Select ANT2 in the SET UP menu under Prog Chan (Program Channels).2. Tune the television to Channel 3 or 4, depending on your VCR+3. Using the VCR, tune to the television program you want to record.4. Begin recording.[] Option B (Recording one program while viewing another program)1. Select ANT1 in the SET UP menu under Prog Chan (Program Channels).2. Press the TM/VIDEO button on the remote control to select the video input (VIDEOVIDEO 2, etc.) connected to your VCR.3. Using the VCR, tune to the television program you want to record.4. Begin recording,S. Press the TVNIDEO button on the remote control to switch back to TV mode.6. Tune the television to the television program you want to view.m=