Panasonic PT-61HX41 Operating Instructions Manual

Also see for PT-51HX41: Operating instructions

Contents

INSTALLA TIONInstallationTelevision LocationThis unit can be used as an entertainment center. Consult your dealer for available options.[] Avoid excessive sunlight or bright lights, including reflections.[] Keep away from excessive heat or moisture. Inadequate ventilation may cause internalcomponent failure.[] Fluorescent lighting may reduce remote control transmitting range,{3 Keep away from magnetic equipment, including motors, fans and external speakers.Optional Cable ConnectionsShielded audio and video cables should be used between components. For best results:[] Use 75-ohm coaxial shielded cables.[] Use appropriate input and output connectors, that match your component connectors.[] Avoid long cables to minimize interference.AC Power Supply CordCAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TOWIDE SLOT OF AC OUTLET AND FULLY INSERT. DO NOT USE A PLUG WiTH ARECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY PolarizedplugINSERTED TO PREVENT BLADEEXPOSURE.PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED OVER, CRIMPED, BENT, ORPINCHED, PARTICULARLYAT PLUGS, CONVENIENCE RECEPTACLES, AND THE POINT WHERETHEY EXIT FROM THE APPARATUS,Cable / Antenna ConnectionFor proper reception, either a cable or antenna connection is required.Cable Connection IncomingCablefromCable CompanyConnect the cable supplied by your local cable company to ANTiconnection on back of television. Select cable mode and ANT1 in SET UP _l,menu under Prog Chan (Program Channels). _Note: A cable converter box may be required for proper reception. 75OhmVHF/UHFCheck with your local cable company for compatibility on backofPTVrequirements.Antenna ConnectionsFor proper reception of VHF/UHF channels, an external antenna is required. Forbest reception, an outdoor antenna is recommended.Connect home antenna to ANT1 connection on back of IncomingCablefromtelevision. Select TV mode and ANT1 in the SET UP menuunder Prog Chan.--:, ._ Cable PresetCable Mode is preset at the factory,Antenna usersmustchange to33/Mode andt ANT 1 in the Set Up menu,Home Antennala