Panasonic PT-CW230E Operating Instructions Manual

Also see for PT-CW230E: Operating instructions Service manual

Contents

Powering ON/OFFENGLISH - 25 Basic OperationON(G)/STANDBY(R) indicatorThe indicator informs you the status of the power. Confirm the status of the STANDBY(R)> indicator before operating the projector.ON(G)/STANDBY(R) indicatorIndicator status StatusNo illumination or flashing The power cord is unplugged.REDLit The power cord is plugged.The projector is in stand-by mode, after the cooling is completed.FlashingThe projector is cooling down. The projector cannot be turned on until cooling iscompleted and the indicator stops blinking.The temperature inside the projector is abnormally high and the projector is coolingdown. And the indicator also blinks in red (Æpage 59). The projectorcannot be turned on until cooling is completed and the indicator stops blinking.GREENLit Projecting.FlashingThe projector is in stand-by status with [Power management] function.The projection lamp will be turned on if the input signal is reconnected or anybutton on the control panel or remote control is pressed. (Æpage 54)