Panasonic PT-D5000E Operating Instructions Manual

Panasonic PT-D5000E Operating Instructions Manual Manual pdf 21 page image

ENGLISH - 21 Basic OperationRemote control operationYou can operate the projector with the remote control within theremote range 30 m (98'5"), approximately ± 30° horizontallyand ± 15° vertically. Facing to the projectorEnsure the remote control emitter is facing to the remotecontrol signal receptor on front/back of the projector andpress the required buttons to operate. Facing to the screenEnsure the remote control emitter is facing to the screenand press the required buttons to operate the projector.The signal will be reflected off the screen. The operatingrange may differ due to the screen material. Thisfunction may not be effective with a translucent screen.The automatic setup function can be used to automatically adjust the resolution, clock phase and picture position whenanalogue RGB signals consisting of bitmap images such as computer signals are being input, or to automatically adjustthe picture position when DVI-D signals are being input.1. Input an analogue RGB image signal.2. Press the AUTO SETUP button.3. Displays a message “PROGRESS”.4. Displays a message “COMPLETE” when ended. When the performance is not completed and ended, displays “INCOMPLETE”.Shutter buttonAuto setup buttonAspect buttonFunction buttonStatus buttonOn screen buttonInput select buttonsTest pattern buttonOperating rangeNOTE:• Do not let strong light shine onto the signal receptor. Theremote control may malfunction under strong light such asfluorescent.• If there are any obstacles between the remote control and theremote control signal receptor, the remote control may notoperate correctly.Setting up the image position automaticallyNOTE:• The automatic setup function does not work with video format signals such as signals output from a DVD player.• It is recommended to supply images with a bright white frame at the outermost periphery containing characters etc. that are clear in whiteand black contrast when the system is in automatic adjustment mode.• Avoid supplying images that involve halftones or gradation such as photographs and computer graphics.• The clock phase adjustment may have been shifted even when the adjustment ended normally. In this case, manually adjust CLOCKPHASE in POSITION menu.• If an image with blurred edges or a dark image is input, “INCOMPLETE” may appear or adjustment may not be performed properly evenif “COMPLETE” appears. In this case, manually adjust INPUT RESOLUTION in ADVANCED MENU, CLOCK PHASE and SHIFT inPOSITION menu.• For specific signals and landscape signals such as 16:9, see AUTO SETUP in DISPLAY OPTION menu of the functional instructionsthat is in the provided CD-ROM.• Automatic adjustment may not be available depending on the machine type of the computer.• Automatic adjustment may not be available for synchronisation signal of C-SYNC and G-SYNC.• Image may be distorted for several seconds during automatic adjustment. This is not a malfunction.• For every supplied signal, adjustment is required.• Automatic adjustment can be cancelled by pressing the MENU button during the course of automatic adjustment.• Even for an RGB signal for which automatic setup is possible, if automatic setup is performed while moving images are being input,“INCOMPLETE” may appear, or adjustment may not be performed properly even if “COMPLETE” appears.