Panasonic PT-D5000E Operating Instructions Manual

Panasonic PT-D5000E Operating Instructions Manual Manual pdf 33 page image

ENGLISH - 33 MaintenanceTroubleshootingShould any problem persist, contact your dealer.Problem Cause Referencepage*1*1. CD-ROM: See the functional instructions in the provided CD-ROM.Power does not turn on.The mains lead may not be connected.The POWER switch is turned off.No electric supply is at the mains socket.TEMP indicator is lit or flashes.LAMP1/LAMP2 indicator is lit or flashes.The lamp unit cover has not been securely installed.The circuit breakers have tripped.181919282831-No picture appears.The video signal input source may not be connected to a terminalproperly.The input selection setting may not be correct.The BRIGHTNESS adjustment setting may be at the minimum setting.The input source which is connected to the projector may have aproblem.The shutter function may be in use.The ACF unit may not have been set correctly.CD-ROM22CD-ROM2232The picture is fuzzy.The lens focus may not have been set correctly.The projector may not be at the correct distance from the screen.The lens may be dirty.The projector may be tilted too much.19CD-ROM-CD-ROMThe colour is pale orgreyish.COLOR or TINT adjustment may be incorrect.The input source which is connected to the projector may not beadjusted correctly.RGB cable is damaged.CD-ROM--The control buttons of theprojector do not operate.CONTROL PANEL of CONTROL DEVICE SETUP in SECURITYmenu is disabled. If you have a loss of the remote control while theCONTROL PANEL is disabled, press and hold the MENU button for2 seconds with pressing the ENTER button.CD-ROMThe remote control doesnot operate.REMOTE CONTROLLER of CONTROL DEVICE SETUP inSECURITY menu is disabled.The batteries may be weak.The batteries may not have been inserted correctly.The remote control signal receptor on the projector may beobstructed.The remote control unit may be out of the operation range.Strong light such as fluorescent shine onto the signal receptor.The remote control ID setting is incorrect.CD-ROM-142121-CD-ROMOn screen menu does notappear.ON SCREEN button on the remote control may have been pressedand cleared. 22The picture does notdisplay correctly.The colour format may not have been set correctly.There may be a problem with the VCR or other signal source.A signal which is not compatible with the projector is being input.CD-ROM-34Picture from a computerdoes not appear.The cable may be longer than the optional cable.The external video output from a laptop computer may not be correct.(You may be able to change the external output settings by pressingthe [Fn] + [F3] or [Fn] + [F10] keys simultaneously. The actual methodvaries depending on the type of computer; refer to the documentationprovided with your computer for further details.)--Picture from a computerDVI-D graphic board doesnot appear.The graphic board driver of the computer needs to be updated to thelatest version.DVI-D IN setting in DISPLAY OPTION menu may be incorrect setting.The computer may need to be restarted after switching DVI-D INsetting in DISPLAY OPTION menu of the projector correctly.-CD-ROM-