Panasonic PT-EZ590 Operating Instructions Manual

Also see for PT-EW550: Operating instructions

Contents

Panasonic PT-EZ590 Operating Instructions Manual Manual pdf 45 page image

Chapter 3 Basic Operations — Switching on/off the projectorENGLISH - 45Switching on/off the projectorConnecting the power cordMake sure that the supplied power cord is securely fixed to the projector body to prevent it from beingremoved easily.Confirm that the

switch is on the side before connecting the power cord.Use the power cord matching with the power supply voltage and the shape of the outlet.For details of power cord handling, refer to “Read this first!” (x page 4).Attaching the power cord1) Check the shapes of the terminal on the rear of the projector body and the power cordconnector, and insert the plug completely in the correct direction (until you hear the side tabs click inplace).Removing the power cord1) Confirm that the

switch on the rear of the projector body is on the side, andremove the power plug from the outlet.2) Remove the power cord connector from the terminal of the projector body while pressing theside tabs.Power indicatorDisplays the status of the power. Check the status of the power indicator before operatingthe projector.Power indicator Indicator status Projector statusOff The main power is switched off.RedLitThe power is switched off (Standby mode). The [PROJECTOR SETUP]menu → [ECO MANAGEMENT] → [STANDBY MODE] is set to [ECO].Projection will start when the power button <v/b> is pressed.f The projector may not operatewhen the lamp indicator or the temperatureindicator is blinking.(x page 137)Blinking*1The power is switched off (Standby mode). The [PROJECTOR SETUP]menu → [ECO MANAGEMENT] → [STANDBY MODE] is set to [NORMAL].Projection will start when the power button <v/b> is pressed.