Panasonic PT-F200 Network Manual

Also see for PT-FW100NTE: Operating instructions User manual Quick guide Quick guide Network guide

Contents

Panasonic PT-F200 Network Manual Manual pdf 25 page image

25ヂ Projector settingsTurn on the projector and press the [NETWORK] button on the remote control.Select [USER 1] - [USER 3] from [WIRELESS LAN] at the network menu and pressthe [ENTER] button.Set the details of network and select [OK].As for network setting items, see pages 54 - 56.Confirm to your system administrator before changing any settings.DHCP OFFIP ADDRESS 192.168.11.100SUBNETMASK 255.255.255.0SSID Panasonic ProjectorMODE AD HOCAUTHENTICATION OPEN (Some computers may require connection by [SHARED ] authentication.)ENCRYPTION NONE…. When not performing encryptionWEP…… When performing encryptionENCRYPTION KEYSETTINGWhen [ENCRYPTION] setting is [WEP ]:DEFAULT KEY : Set 1 – 4 numerals for the default key.KEY 1 – 4 : Set these to match the WEP key registered in [DEFAULT KEY].“Glossary” (See pages 70 - 71)Connecting with wireless LAN (cont.)123Before starting up Wireless Manager ME 4.5, the “Setting the computer IP address” (See page 26) must first be performed.After completing this operation, start up Wireless Manager ME 4.5.Confirm to your system administrator before changing any settings.Following settings are examples of when using a default setting projector.When using Windows VistaWhen the user has the computer administrator authorityWhen logging on without administrator authorityYou can perform Easy Wireless Set Up if you have administrator authority on the computer. See page 15.