Panasonic PT-F200 Network Manual

Also see for PT-FW100NTE: Operating instructions User manual Quick guide Quick guide Network guide

Contents

Panasonic PT-F200 Network Manual Manual pdf 37 page image

37Various projection methods (cont.)Check the status indication on the launcher to make sure that transmission ispossible (check that the green lamp is lit).2Press the [MULTI-LIVE] button on the remote control to turn the projection screeninto a full screen display (the status when no index window is displayed).(See page 36)If you press the [MULTI-LIVE] button once or twice when index windows are displayed on the projection screen, thescreen will switch over to a full screen display.1Click [ ] on the launcher.The window shown to the right appears.3Select and click the projection position.The computer image is transmitted to the selected quarter of the projection screen.4 Switching to a different positionSelect and click a different projection position in step 4 above.Enlarged displayIf [ ] is clicked with a computer, projector screens temporarily change to full screen display.To return to the original display, click [ ] with the computer that click [ ] and select originalprojection positions with each computer.Quitting 4-screen multi styleSelect and click the checked position in step 4 above.• In the 4-screen multi style, the computer screens from all the computers connected to the projector can be transmitted to theprojector. (If an image from another computer has been sent to the image position where an image is already displayed, theexisting image is replaced by the new image.)• Picture quality or other options can be set on the ] on the launcher.• If the connection error occurs during projection, the message [Stop “Live mode”] will appear, then restart projection by clickinglauncher buttons.4-screen multi styleConnect up to four computers to one projector, and then divide the projector screen into four parts, and simultaneously displaythe screens for the four computers on the projector screen.