Panasonic PT-F300E Operating Instructions Manual

Also see for PT-F300E: Operating instructions Service manual Service manual

Contents

Panasonic PT-F300E Operating Instructions Manual Manual pdf 16 page image

PreparationAbout Your ProjectorENGLISH - 16Remote controlNOTE:• Do not drop the remote control.• Avoid contact with liquids or moisture.• Use manganese batteries or alkaline batteries with the remote control.• Do not attempt to modify or disassemble the remote control. Contact an Authorised Service Centre for repairs.• Do not keep pressing the remote control buttons as this may shorten battery life.• Do not point the laser in other people’s eyes or stare into beam.• See “Remote control operation” on page 27.Power buttonWhile the MAIN POWER ison, switch between standbymode and projection mode.(page 23)Project a laser pointer.(page 30)Display the main menu.(page 34)Navigate through themenus with FGIH, andactivate the menu itemwith the ENTER button.(page 34)Capture the projected imageas a frozen picture.(page 29)Reset some of the settingsto the factory defaultsettings. (page 29)Assign the frequently usefunctions from the optionsfor shortcut. (page 30)Control to change the scaleby means of digital zoom.(page 28)Automatically adjust thesetting of SHIFT, DOTCLOCK, CLOCK PHASEand SIGNAL SEARCH forthe projected image of COMPUTER/DVI signal. (page 27)Switch the required inputsignal button to select.Return to the previous menu.(page 34)Turn off the projectiontemporarily. (page 29)Display the frozen imagewhile the display ofsubsequent imagescontinues. (page 29)Control to adjust the volumeof the speaker. (page 31)These buttons are for network control. See the contents of theprovided CD-ROM for instructions. The COMPUTERSEARCH button is for PT-F300NTE only. Battery compartment1. Press the tab and lift up the cover.2. Insert the batteries according to the polarity diagramindicated inside.Attaching a hand strapYou can attach afavourite strap on to theremote control.Top viewRemote control signalemitters (page 27)Laser pointer beamemitter (page 30)Remote control indicatorPressing any button except the LASERbutton, the remote control indicator willflash. Pressing the LASER button, it willlit.(Shown as PT-F300NTE)