E NGLISH -21 Getting started20E NGLISHExample of connecting to computerNOTE:B It is better to shut down the computer before turning off the MAINPOWER switch of the projector.B Do not input the signal to the RGB2 IN/RGB1 OUT connector when theRGB2 SELECT item in the OPTION menu is set to “OUTPUT”. (Referto page 45.)NOTE:B If the video signal source is connected using a cable with a BNC connector plug, use aBNC/RCA adapter (sold separately) to convert the cable end to an RCA plug-type jack.B If the signal cables are disconnected or if the power supply for thecomputer or video deck is turned off while the digital zoom function isbeing used, this function will be cancelled.ConnectionsNotes on connectionsB Read the instruction manual for each system component carefully before connecting it.B Turn off the power supply for all components before making any connections.B If the cables necessary for connecting a component to the system are not included with the componentor available as an option, you may need to fashion a cable to suit the component concerned.B If there is a lot of jitter in the video signal which is input from the video source, the picture on thescreen may flicker. In such cases, it will be necessary to connect a TBC (time base corrector).B Refer to the list on page 62 for details on compatible signals which can be input to the projector.B Only one audio system circuit is available for each of the AUDIO IN L-R jacks forS-VIDEO/VIDEO signals and the RGB AUDIO IN jack, so if you wish to changethe audio input source, you will need to remove and insert the appropriate plugs.Example of connecting to video equipmentsD-sub 15 (male) - BNC5 (male)adapter cableRed (connect to PR signal connector)Blue (connect to PB signal connector)Green (connect to Y signal connector)DVD playerD-sub 9-pin(male)DVD playerAudio system Video deckComputer forcontrol use1 62 3 4 5ON DIPD-sub 9-pin(male)Computer forcontrol useComputerMonitorAudio systemRefer to the accessory CD-ROM for details on the wireless networkthat is used for controlling the projector with a personal computerby means of the wireless card. (PT-L735NTE only)