Panasonic PT-LB30E Operating Instructions Manual

Contents

46-ENGLISHRGB2 SELECTThis setting is used to select thefunction of the RGB2 IN/1 OUTconnector.RGB/YP BP RThis should normally be set to“AUTO”. RGB or YPBPR is selectedautomatically depending on thesynchronising signal status.When 480i, 576i, 480p, 576p,1 080/60i, 1 080/50i, 720/60p andsome VGA480 signals are beinginput, select “RGB” or “YPBP R ” inaccordance with the input signal.VGA60/480pSet to “VGA60” when 59.9HzVGA480 signals are being input(refer to page 62 for details). Set to“480p” when 480p RGB signals arebeing input.SXGA MODEThis setting is only for an SXGAsignal.SXGASelect this item normally.SXGA+When the edges of the projectedimage are not visible, select thisitem.Noise Reduction (NR)(S-VIDEO/VIDEO only)If the signal is of such poor qualitythat picture interference appears,set “NR” to “ON”. To turn off the“NR” feature, set to “OFF”.BLACKBOARDSet to “ON” when “PICTUREMODE” is set to “BLACK-BD”.(Refer to page 37.)BACK COLORThis sets the colour which isprojected onto the screen when nosignal is being input to the projector.FRONT/REARThis setting should be changed inaccordance with the projectorsetting-up method.(Refer to page 18.)FRONTWhen the projector is placed in frontof a screen.REARWhen using a translucent screen.R G B / Y P B P R A U T O[R G B[Y P B P RV G A 6 0 / 4 8 0 p 4 8 0 p[V G A 6 0B A C K C O L O R B L U E[B L A C KF R O N T / R E A R F R O N T[R E A RS X G A M O D E S X G A[S X G A +