E NGLISH-5 PreparationPrecautions with regard to safetyWARNINGIf you notice smoke, strange smells or noise coming from theprojector, disconnect the mains plug from the mains socket.B Do not continue to use the projector in such cases, otherwise fire orelectric shocks could result.B Check that no more smoke is coming out, and then contact an AuthorisedService Centre for repairs.B Do not attempt to repair the projector yourself, as this can be dangerous.Do not install this projector in a place which is not strong enough totake the full weight of the projector.B If the installation location is not strong enough, it may fall down or tip over,and severe injury or damage could result.Installation work (such as ceiling suspension) should only be carriedout by a qualified technician.B If installation is not carried out correctly, there is the danger that injury orelectric shocks may occur.If foreign objects or water get inside the projector, or if the projector isdropped or the cabinet is broken, disconnect the mains plug from themains socket.B Continued use of the projector in this condition may result in fire or electricshocks.B Contact an Authorised Service Centre for repairs.Do not overload the mains socket.B If the power supply is overloaded (for example, by using too manyadapters), overheating may occur and fire may result.Do not remove the cover or modify it in any way.B High voltages can cause fire or electric shocks.B For any inspection, adjustment and repair work, please contact anAuthorised Service Centre.Clean the mains plug regularly to prevent it from becoming covered indust.B If dust builds up on the mains plug, the resulting humidity can damage theinsulation, which could result in fire. Pull the mains plug out from themains socket and wipe it with a dry cloth.B If not using the projector for an extended period of time, pull the mainsplug out from the mains socket.