Settings28 ENGLISHMenu operation (continued)PROJECTOR SETUP menuSub-menu item Default PageSTATUS — 36NO SIGNAL SHUT-OFF DISABLE 37INITIAL START UP LAST MEMORY 37INSTALLATION FRONT/DESK 37HIGH ALTITUDE MODE OFF 37STANDBY MODE ECO 37LAMP POWER NORMAL 37LAMP RUNTIME — 38EMULATE DEFAULT 38FUNCTION BUTTON STATUS 38AUDIO SETTING — 38TEST PATTERN — 39INITIALIZE ALL — 39SECURITY menuSub-menu item Default PagePASSWORD OFF 40PASSWORD CHANGE — 40TEXT DISPLAY OFF 40TEXT CHANGE — 40MENU LOCK OFF 41MENU LOCK PASSWORD — 41CONTROL DEVICE SETUP — 42NETWORK menuFor details of items, see “Network Operation Manual”.Sub-menu item DefaultWIRED LAN —NAME CHANGE —NETWORK CONTROL ONSTATUS —INITIALIZE —NOTE:Sub-menu items and the factory default settings vary•according to the selected input signal.PICTURE MENURemote control Control panelMENU RETURNENTERFREEZEAVMUTECOMPUTER VIDEODEFAULT FUNCTION WIN.INDEX-MENUENTERDEFAULTSTANDBY(R)ON(G)LAMPTEMPMENU FUNCTIONENTERINPUTSELECTMENUENTERMENU RETURNENTERFREEZEAVMUTECOMPUTER VIDEODEFAULT FUNCTION WIN.INDEX-MENUENTERDEFAULTSTANDBY(R)ON(G)LAMPTEMPMENU FUNCTIONENTERINPUTSELECTMENUENTERSet the selected item with [].▌PICTURE MODEYou can optimize the projected image depending on theprojection’s environment.Change settingChangesettingChangesettingChange settingSTANDARD Setting for general imageDYNAMIC Setting for brightness andsharpnessBLACKBOARD Setting for when projecting on ablackboardWHITE BOARD Setting for when projecting on awhite boardNATURAL Reproducing the original color ofthe imageNOTE:It may take a while until the selected mode is stabilized.•▌CONTRASTYou can adjust the contrast of the projected image.LowerChangesettingChangesettingHigher▌BRIGHTNESSYou can adjust the brightness of the projected image.DarkerChangesettingChangesettingBrighter