Panasonic PT-LB3U Operating Instructions Manual

Also see for PT-LB1U: Operating instructions Operating instructions Operating instructions

Panasonic PT-LB3U Operating Instructions Manual Manual pdf 52 page image

References52  ENGLISHTechnical Information (continued)Cable specifications(When connected to a personal computer)Control commandsThe following commands are used for control of the projector with a computer. (Operation commands)Command Control contents RemarksPON Power on • The PON command is ignored during lamp ON control.• If a PON command is received while the cooling fan is operating after the lamp has switched off,the lamp is not turned back on again straight away in order to protect the lamp.POF Power offAVL Volume Parameter:000 - 063 (Adjustment value 0 - 63)IIS InputParameter:VID = VIDEO SVD = S-VIDEO RG1 = COMPUTER 1 INRG2 = COMPUTER 2 INQ$S Lamp conditionqueryCall back:0 = Standby 1 = Lamp on control active 2 = Lamp on 3 = Lamp off control activeOSH AV muteTurn off the projection and sound temporarily.Send the command to switch between off and on. ( page 23)Do not send the command consecutively.0 = Off 1 = OnNOTE:If• STANDBY MODE is set to ECO, only PON and Q$S command can be used in the standby mode.MENU LOCK PASSWORDTo reset the password to the initial setting, contact your dealer.Projector PC(DTE)