Panasonic PT-LB75VU Operating Instructions Manual

Also see for PT-LB75VEA: Operating instructions Brochure & specs

Contents

Panasonic PT-LB75VU Operating Instructions Manual Manual pdf 20 page image

Switching the projector on/offBasic Operation20 - ENGLISHPOWER and POWER LOCK indicatorsThe POWER indicator informs you of the status of the power and the POWER LOCK indicator shows the statusof the RELEASE button. When the TEMP indicators are flashing, the POWER and POWER LOCK indicators willlight red and you cannot switch the projector on.POWER indicatorPOWER LOCK indicatorJ POWER LOCK indicator statusIndicator status StatusNo illumination or flashingNo power is supplied.zThez RELEASE button is pressed and the POWER button is unlocked whilethe power is on.Red Lit The POWER button is locked.Flashing Pressing the locked POWER button.J POWER indicator statusIndicator status StatusNo illumination or flashing No power is supplied and the internal cooling fan is not operating.Red Lit The power is turned off (when STANDBY MODE is set to ECO).If the POWER button is pressed, projection starts.Flashing The power is turned off (when STANDBY MODE is set to NORMAL).Green Flashing The power is on and preparing for projection.Lit The projector is projecting.OrangeLit No power supply and the internal fan is cooling the lamp by internal powersupply.Flashing The power is switched on again while cooling the lamp and recovering to theprojection mode. Recovery may take a while.RemarksWhen the power is turned off, the internal fan is cooling the lamp by internal power supply.zThe power is switched on again while cooling the lamp and recovering to the projection mode. Recovery mayztake a while.Even while the power is turned off (whenz STANDBY MODE is set to ECO, the POWER indicator is lit in red),power of about 0.9 W is consumed.