Panasonic PT-LB75VU Operating Instructions Manual

Also see for PT-LB75VEA: Operating instructions Brochure & specs

Contents

Panasonic PT-LB75VU Operating Instructions Manual Manual pdf 25 page image

Remote control operationBasic OperationENGLISH - 25Setting up the image positionautomaticallyWhen a RGB signal is input, the projector adjusts theSHIFT, DOT CLOCK and CLOCK PHASEautomatically.Press button.Screen Projected imageRemarksThez SIGNAL SEARCH operation is also performed.(When SIGNAL SEARCH is set to ON)(Æpage 37)If the dot clock frequency is 108 MHz or higher,zDOT CLOCK and CLOCK PHASE are noteffective. (Æpage 32)If the projected image is too dark or blurred aroundzthe edge, AUTO SETUP may stop the processingbefore completing the adjustment and return to theprevious setting. Project a much clearer or lighterimage and try again.Resetting to the factorydefault settingsYou can reset most of the customised settings to thefactory default settings by pressing the DEFAULTbutton of the remote control.Press button.For details, see “Menu Navigation - Navigatingzthrough the MENU - Resetting to the factory defaultsettings”. (Æpage 27)Controlling the volume of thespeakerYou can control the volume of the built-in speakersand output audio sound.Press button.+ button: increases the volumez-z button: decreases the volumeProjecting an imagein INDEX-WINDOW modeYou can project an image split in 2 windows as anINDEX WINDOW. One is frozen and stored inmemory, and displayed on the screen’s left side whiledisplaying subsequent image continues on the right.Press button.Press the RETURN button to escape.The image being projected when the INDEX-WINDOW button is pressed will be a frozen image.FrozenimageContinuingimageProjectedimageJ INDEX-WINDOW displayPress ▲▼ buttons tocapture a new imageand change the size in 3ways.In default, the frozenimage is displayed on theleft and the subsequentimage is displayed on theright. Press ◄► buttonsto switch the position.FrozenimageFrozenimageFrozenimageContinuingimageContinuingimageContinuingimageFrozenImageContinuingimageFrozenImageContinuingimageRemarksThe aspect ratio of the image is changed andzbecomes vertically elongated.If you change the window size, the aspect ratio ofzthe image is changed. (Æpage 33)While inz INDEX-WINDOW mode, press the ENTERbutton to capture a new image and the frozenimage window will be updated in a moment.When capturing a quick moving picture, performzseveral times to get a stable picture.