Panasonic PT-LM1U Operating Instructions Manual

Also see for PTLM1U - LCD PROJECTOR: Specifications

Panasonic PT-LM1U Operating Instructions Manual Manual pdf 11 page image

E NGLISH -21 Getting started20-ENGLISHInsert the accessory lithium battery while making sure that the polarities are correct.# While pushing the battery holder tab to the right, pull out the batteryholder.$ Insert the battery into the battery holder so that the + side is facingupward.% Insert the battery holder.Preparation for the remote control unitNOTE:B Do not drop the remote control unit.B Keep the remote control unit away from liquids.B Remove the battery if not using the remote control unit for long periods.B Use only CR2025 batteries as replacement batteries.B If the remote control unit is held so that it is facing directly in front of theremote control signal receptor, the operating range is withinapproximately 7 m (23´) from the surfaces of the receptor. Furthermore,the remote control unit can be operated from an angle of ±30° to the leftor right and ±15° above or below the receptors.B If there are any obstacles in between the remote control unit and thereceptor, the remote control unit may not operate correctly.B If strong light is allowed to shine onto the remote control signal receptor,correct projector operation may not be possible. Place the projector asfar away from light sources as possible.B If facing the remote control unit toward the screen to operate the projector,the operating range of the remote control unit will be limited by the amountof light reflection loss caused by the characteristics of the screen used.Push the tabPull outBack sideMatch the “+”surface of thebattery with the“+” marked side ofthe battery holder.NOTE:B If the signal cables are disconnected or if the power supply for thecomputer or video deck is turned off while “D.ZOOM”(digital zoom) or“INDEX WINDOW” is being used, these functions will be cancelled.Connecting to video equipmentDVD player Video deckDVD player(with component video jack)D-sub15-pin (male) - BNCx5 (male) adapter cableRed (connect to PR signal connector)Blue (connect to PB signal connector)Green (connect to Y signal connector)BNC/RCA adapter