Panasonic PT-LM1U Operating Instructions Manual

Also see for PTLM1U - LCD PROJECTOR: Specifications

Panasonic PT-LM1U Operating Instructions Manual Manual pdf 12 page image

E NGLISH -23 Basic OperationTurning on the powerBefore turning on the power1, Ensure that all peripheraldevices are connectedproperly.2, Remove the lens cover.Lens coverPower cordPower indicatorConnect the accessory power cord to the AC INsocket.BThe power indicator on the projector will illuminate red.Press the POWER button.BThe power indicator on the projector will flash green. After a shortperiod, the indicator will illuminate green, and a picture will beprojected.Turn on the power of all connected devices.BStart the play function of a device such as a DVD player.NOTE:B If the power cord was disconnected during projection when the projectorwas used the last time, projection will start after the power cord isconnected (when “POWER MEMORY” in the “OPTION2” menu is set to“ON”). Refer to page 44 for details.B A tinkling sound may be heard when the lamp unit is turned on, but thisis not a sign of a malfunction.Press the input select button to select theinput signal.Follow the procedure below when you set the projector up first, and whenyou change the setup place.Press the AUTO SETUP button to initiateautomatic positioning.BThe tilt of the projector and the inputsignal will be detected and keystonedistortion and the position of theimage will be corrected.(Refer to page 26 for details.)Adjusting the sizeBTurn the zoom ring to adjust the size of the projected image.Adjusting the focusBTurn the focus ring to adjust the focus of the projected image.AUTO SETUPInput selectbuttonsChangingsignalsVIDEO RGB&')*(#$%Adjusting the angleBWhile pressing the adjuster buttons,adjust the forward/back angle of tiltof the projector. Adjust so that theprojector is as vertical to the screenas possible.#ENTERFREEZE SHUTTERINDEXWINDOWPROJECTORVOLUME D.ZOOMSTDVIDEOINPUTPOWERRGBMENUAUTOSETUP)*$&('BA picture will be projected in accordance with the selected inputsignal.BWhen a YPBPR signal is being input, “YPBPR” will be displayedinstead of “RGB”.22-ENGLISH