Panasonic PT-LX30HU Operating Instructions Manual

Also see for PT-LW25HEA: Operating instructions

Contents

Panasonic PT-LX30HU Operating Instructions Manual Manual pdf 39 page image

ENGLISH - 39 SettingsInput menuSelect [Input] from the Main Menu (see“Navigating through the menu” on page 36),then select the item from the sub-menu.Remote Control Control PanelComputer 1: RGB/Component/RGB (Scart)/S-videoPress ▲▼ to select [Computer 1].1 )Press ► to access the submenu.2 )Press ▲▼ to select [RGB],3 )[Component], [RGB(Scart)] or[S-video].Press the button.J Computer System SelectionThis projector automatically tunes to various types ofcomputers with its Multi-scan system and [Auto PCAdjustment]. If a computer is selected as a signalsource, this projector automatically detects the signalformat and tunes to project a proper image withoutany additional settings. (Signal formats provided inthis projector are shown on pages 71-73.)When the projector can not recognize theconnected signal conforming to theprovided PC Systems, Auto is displayedon the System Menu box and the Auto PCadjustment function works to display properimages. If the image is not projectedproperly, a manual adjustment is required.There is no signal input from the computer.Check the connection between yourcomputer and the projector.The preset system is manually adjusted inthe [PC adjust] Menu. The adjusted datacan be stored in Mode 1-10.PC Systems provided in this projectoris chosen. The projector chooses a propersystem provided in the projector anddisplays it.* Mode 1 and SVGA 1 are examples.Press ▲▼ to select [System].1 )Press ► or the button.J Video System SelectionVideo or S-videoAutoThe projector automatically detects an incoming videosystem, and adjusts itself to optimize its performance.When [Video System] is [PAL-M] or [PAL-N], selectthe system manually.PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-NIf the projector cannot reproduce proper video image,select a specific broadcast signal format from among[PAL], [SECAM], [NTSC], [NTSC 4.43], [PAL-M] and[PAL-N].AUTO- - - -Mode 1SVGA 1