ENGLISH -49SettingsCustom adj.Adjust the screen scale and position manually withthis function.Press ▲▼ to select [Custom adj.].1)Press ► or the 2)enter the next submenu.Press ▲▼ to choose the item you3)want to adjust.You can choose one from the items as below:zScale H/VAdjust the [Horizontal/Vertical] screenscale.H&VWhen set to [On], the aspect ratio isfixed.Position H/VAdjust the [Horizontal/Vertical] screenposition.CommonSave the adjusted scale or positionto all the inputs.ResetReset the all adjusted values.Digital zoom +Zoom in the images.Press ▲▼ to select [Digital zoom +]1)and then press the The On-Screen Menu disappears andz[D. zoom + ] appears.Press the 2)in the image size andpress ▲▼ ◄►tomove the image to the top/bottom/left/right of the screen.The Panning function can work only when thezimage is larger than the screen size. A projectedimage can be also zoomed in by pressing the or the Digital zoom -Zoom out the images.Press ▲▼ to select [Digital zoom -]1)and then press the The On-Screen Menu disappears and [D. zoomz- ] appears.Press the 2)out the image size.The projected image can be also zoomedzout by pressing the or theTo exit the Digital zoom +/– mode, press any buttonexcept the , buttons.To return to the previous screen size, select a screensize from the Screen Size Adjustment Menu or selectan input source from the Input Source Selection Menu(Æpage 39) again, or adjust the screen size with the buttons.NoteWhen input computer signal to the projector, this functionzwill be available.[Digital zoom +/-] cannot be selected when [True] iszselected in the [Screen] menu.[Digital zoom -] cannot be selected when [Custom] iszselected in the [Screen] menu.[Digital zoom +/–] are disabled and cannot be displayedzwhen [480i], [576i], [480p], [576p], [720p], [1035i] or[1080i] is selected in the PC System Menu. (Æpage 40)KeystoneThis function is used to adjust keystone distortion ofthe projected image.Press ▲▼ to select [Keystone].1)Press ► or the 2)Press ▲▼ to choose the item you3)want to adjust.KeystoneTo correct keystone distortion.StoreTo store or reset the keystonecorrection.The following items are thesubmenu of [Store].StoreKeep the keystone correctioneven when the AC power cord isunplugged.ResetRelease the keystone correctionwhen turn off the projector.Screen