Panasonic PT-LX30HU Operating Instructions Manual

Also see for PT-LW25HEA: Operating instructions

Contents

Panasonic PT-LX30HU Operating Instructions Manual Manual pdf 57 page image

SettingENGLISH - 57 SettingsFanPress ▲▼ to select [Fan] and then1 )Press button.Press ▲▼ to select one among2 )options as below.Choose the running speed of cooling fans fromzthe following options according to the groundelevation under which you use the projector.Off Normal speed.*1On1 Faster than [Off] mode.*2On2 Faster than [On 1] mode.*3Set this function to [Off ] when using the projector*1 :in non-high altitude environment.Select this mode when using the projector in high*2 :altitudes (about 1,200 meters or more abovethe sea level) where the fans have less coolingeffect.Select this mode when using the projector in*3 :higher altitudes (than above where the fans havelesser cooling effect).NoteFailure to set the running speed of cooling fanszproperly may affect the projector life.The fan noise becomes louder in [On 1] and [On 2].zVideo delay controlThis function allows you to make a digital processingof a projected image faster.Press ▲▼ to select [Video delay1 )control] and then press the button.Press ►or the button.2 ) [Lamp runtime Reset?] appears. Select [Yes]zto continue. Another confirmation dialog boxappears, select [Yes] to reset the Lamp runtime.AttentionWhen the lamp runtime is elapsed the estimatedzduration, [Lamp runtime] will be displayed in re dand the Lamp replacement icon (Æpage 63) willappear on the screen, indicating that the end oflamp life is reached. When replacing the lamp unit,reset the lamp runtime.Filter