Panasonic PT-TW330EA Operating Instructions Manual

Also see for PT-LW271U: Specifications Operating instructions Operating instructions

Contents

Panasonic PT-TW330EA Operating Instructions Manual Manual pdf 40 page image

Setting40 - ENGLISHSettingsSettingSelect [Setting] from the Main Menu (see “Howto operate menu” on page 33) and then selectthe item from the Sub Menu.PT-TW330LanguageThe language used in the On-Screen Menu isavailable in English, German, Spanish, French, Italian,Dutch, Portuguese, Japanese, Simplified Chinese,Polish, Korean, Russian, Swedish, TraditionalChinese, Arabic, Norwegian, Turkish, Thai, Czech,Hungarian and Kazakh.Press ▲▼ to select [Language].1 )Press ► to display the language dialog2 )box.Press ▲▼ to select the desired item3 )and press ► to choose.Menu LocationSwitch the menu location on the display screen.Change order: Left Topz  Right Top  Center Left Bottom  Right Bottom.Press ▲▼ to select [Menu Location].1 )Press ► to display the setting dialog2 )box.Press ◄► to select the desired item.3 )Closed Caption[Only for NTSC input].Press ▲▼ to select [Closed Caption].1 )Press ► to display the setting dialog box.2 )Press ◄► to select the desired item.3 )Off Do not display Closed Caption.CC1 Displays the CC1 data.CC2 Displays the CC2 data.CC3 Displays the CC3 data.CC4 Displays the CC4 data.NoteThe closed caption is mainly used in the north America.zThis function shows the text information contained in theimage signal. Captions may not be displayed on somedevices or software.You can select [Closed Caption] only when NTSC signalzis input.When Menu screen is displayed, the caption will not bezdisplayed.Part of Closed caption may not be displayed when highzcompensation values are set in [V Keystone].VGA Out (Standby)When in standby mode, choose whether to output thesignal from to terminal.Press ▲▼ to select [VGA Out (Standby)].1 )Press ► to display the setting dialog2 )box.Press ◄► to switch [On]/[Off].3 )OnOutput image signal from terminal when theprojector is in standby mode.OffImage signal from terminal can not be output when theprojector is in standby mode.Test PatternUse this function to display built-in test pattern wheninstalling the projector.Press ▲▼ to select [Test Pattern].1 )Press ► to display the setting dialog2 )box.Press ◄► to switch [On]/[Off].3 ) If you want to return the normal mode to thezprevious image, set [Test Pattern] to [Off] in the[Setting] menu.On Display the built-in Test Pattern.Off Disable the function.